Separate names with a comma.
Some features disabled for guests. Register Today.
If in doubt, consult an electrician. You can check for mains earth to DC ground with a multimeter but ONLY do so with every mains connection...
This has come up a few times in the past - search the forum for the phrase "train lift". Alex.
EDIT;- Thank you Peter, have deleted the incorrect info (must drink more coffee before posting) Alex.
What controller do you have? Please post your grbl settings here. Alex.
You cannot calibrate accurately by cutting - that introduces other variables that affect the calculation. You also cannot calibrate accurately...
You only need the correct post processor for your controller - the machine profile in Fusion doesn't add much functionality - I've never bothered...
The guide I linked you to tells you how to identify motor wiring pairs without a multimeter. Alex.
This guide will probably help you - there is no standard for the colour coding of stepper motor wiring. docs:blackbox-4x:faq-identify-motor-coils...
No, Please post the workspace export so we can check for you: CAM > File > Export Workspace .OBC, as @Peter Van Der Walt said. Alex.
I definitely recommend getting to grips with Fusion cam - installing the Openbuilds post processor is not that difficult and the instructions are...
You can replace them "in place" as long as you can get at the fixing screws. Alex.
Feedrate (speeds) and acceleration settings yes, Ramping settings would be in your cam software. grbl/settings.md at master ยท gnea/grbl $110,...
$12 setting is correct. Glad you solved it. Alex.
Small arcs may be your problem (GRBL error 33) - what is your $12 setting? Alex. PS - I couldn't find this line (G2X6.306Y6.504I0.263J0.315) in...
You have to put the post processor in the post processor folder (or MyPostP folder - if there are any post processors in this folder they will be...
You have some adjustment with the play in the holes that the screw holding the wheels goes through. If you set the eccentric to it's loosest...
Just to clarify, you set the Machine co-ordinate system by homing to limit switches, but you set the WORKPLACE co-ordinate system zero (set XYZ)...
That will get you close, but don't forget you will need to calibrate your machine to get it really accurate. Our leadscrews are formed by rolling...
Have you checked the offset box in toolpath settings? Alex.
People hang mains and spindle cables above the machine precisely because putting it in the drag chain leads to electrical problems (interference -...
