Separate names with a comma.
Some features disabled for guests. Register Today.
have you got the rotary connected to the Y axis on the Blackbox? soudns like you have X connected instead.
that is backlash, either X or Y is flexing for a bit until it 'catches up'.
what actual controller are you using, sounds like it is not GRBL based
fixed in V1.0.41 GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with OpenBuilds Machines running...
I have uploaded V1.0.41 that fixes the namespace collision GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360...
hmmm, looks like they have created a new internal property named 'power' and made it readonly. I will post a new version tonight
now you need to run the calibration wizard, belts stretch and the calculated 26steps/mm is never accurate enough over the full lengths
homing sets G53, please read this Home, Fusion360 and G53 Z moves
quite possibly a bad bearing. how much noise does it make? collet nut might also get hot from heat transferred from the bit. what were you...
there is a thread about this going on right now .... Stepper Motor tuning test
home sweet home Home, Fusion360 and G53 Z moves
and AXYZ - 028756 Trident/ISM - 45 Deg Knife Cartridge but you will need a rotatry axis that is driven to the correct angle for the cut. A axis on...
nifty, will be using that...
ChatGPT (free AI chatbot) does an excellent job of translating French to English and back. so you can type your question in french, have it...
so get a donek and put some CA gluein the bearings ? (-:
I did a bunch of sketchup CAM videos some years ago, cant recall now if one of them does a full walkthrough from drawing to product. Have a waltze...
I like to do a binary search: say the default is 400mm/min double it and try 800, works? double it to 1600, works? double it to 3200, fails! ok,...
GRBL is dead, long live grblHAL (-: no reason to try the others unless you are willing to dig into the documentation for each of them to see if...
I did not say you need a Blackbox X32, I said you need to look at what grblHAL can do with a Teensy or similar board, the ESP32 in the X32 is...
