Separate names with a comma.
Some features disabled for guests. Register Today.
...[ (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) ] ok [17:51:05] [ G53 G0 Z-10 ] ok [17:51:05] [ G0 X199.928...
...G54 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-10 G0 X201.95 Y1.515 S12000 M3 G4 P1.8 G0 X201.95...
The posts do not have an issue, your machine, or how you are setting it up, is the issue. In Fusion you must set the origin to the top of the...
G53 (move in machine coordinates) G0 (its a rapid move) Z (in the Z axis) -10 (to -10mm below the Z axis limit switch because its in Machine...
...... G54 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-10 Couple questions: G54 tells the machine to...
ok, so the G53 G0 Z-10 is hitting the limit switch at the top of Z travel? lets just make sure we have the basics.... Z positive tool travel is...
I’m going to read the link you sent but one thing to add is that I haven’t edited this code at all this was a direct fresh dump from fusion.
G53 Z-10 is a clearance move. It will move to 10mm below your z limit switch. Then move to the first position. By the looks of the log it...
Working on getting my machine set up and running and seem to be running into a problem in the beginning of every job. I’m using JS CNC with...
Select flood and it will generate an M8. Make sure you have "has coolant" enabled in the post processor settings. flood = M8 mist = M7 flood and...
But rather than the built in fusion Grbl post that uses confusing G28, rather use ours that uses the easier G53 concept as linked above
Use the OpenBuilds Fusion Post: docs:software:fusion360 [OpenBuilds Documentation] Make sure you home your machine before setting work zeros....
I would use a macro button in Openbuilds control to move the machine to the sharpie offsets (in G54), select G55, then use the 'setzero' buttons...
Hello! I have a Lead 1010 and I've added a Sharpie pen plotter to it, and I could use some help figuring out the software (specifically how to...
If you run Fusion GCODE and other more advanced CAMs that also runs in G53, you need Machine Coordinates set too
If you hover your mouse over the various settings you get help text that pops up. That help text tells you to always use a negative number. The...
Just fought this error. Homing worked but the program would alarm out. Discovered you can't home your Z at end of program with the Z limit...
Everyone needs to know where home is and have a suitable sense of self (-: For a CNC machine this is 'home' and the Machine Coordinate System...
Our Fusion Post's Z Retract is in Machine Coordinates. Make sure you have homed, and make sure you have a negative number in the Start and End of...
...3) G54 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-0.3937 G0 X5.9587 Y9.553 S5000 M3 G4 P1.8 G0...
