Separate names with a comma.
Some features disabled for guests. Register Today.
Hello everyone, i´m doing my first steps in cnc and and i´m a little lost with the software. I use a RatRig Stronghold one (750x750mm) with the...
Those options tell me you are not using the OpenBuilds postprocessor for Fusion360. Get it here docs:software:fusion360 [OpenBuilds Documentation]...
Having read through all of this and the associated links, none of them solved my issue. The issue was in the post-processor and can be found in...
Now that you have removed the G53 move your first move G0 Z-10 is in the WORKPLACE coordinates system and should go to 10 mm BELOW where you set...
...G0 Z6 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-10 M5 G0 X-10 Y-10 M30 The initial move is to...
cannot see anything wrong with the Gcode, but I do see that the post version is 1.0.32, the latest is 1.0.36, please upgrade so we are all using...
...G54 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-10 G0 X42.725 Y28.2 M3 S12000 G4 P1.8 G0 X42.725...
...workspace (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-10 ; move Z up to 10mm below the home...
This is a lot more informative than your other post. If you remove the G53 G0 Z move Z axis will not move at the start of the job. Your error...
...G54 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-10 G0 X679.003 Y24.365 S12000 M3 G4 P1.8 G0...
read it more carefully, is a WARNING not an error. The post uses G53 moves which rely on proper homing and since we had a lot of people...
Hello everyone, I have been facing an issue with my CNC machine (Lead 1010) when using G-code generated by Fusion360. Every time I try to run the...
...G54 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z0.9449 G0 X-6.1289 Y5.028 S18000 M3 G4 P1.8 G0...
How do I keep Fusion 360 from adding the G53 commands below? Those cause issues with my gcode. Without them, the program runs fine. With them,...
X and Y and Z ? at bottom left of your workpiece? from the code it looks like your work zero is the middle of the worpeice, so you need to...
...G54 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-0.3937 G0 X-9.6996 Y-0.0249 S5000 M3 G4 P1.8 G0...
...G54 (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z-0.3937 So that would look like... G90 G21 G17...
The Openbuilds post processor for Fusion relies on the machine home position being set as it uses machine co-ordinates (G53) for the first safety...
(This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z0 Z0 is always going to hit the limit switch, that is why...
...GRBL.) (This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z0 G0 X42.83 Y2.5 F750 G0 X42.83 Y2.5 Z15 Z2 M3...
