Separate names with a comma.
Some features disabled for guests. Register Today.
Fusion has a learning curve to it, but good choice. Remember to use our Post processor: docs:software:fusion360 [OpenBuilds Documentation] And...
You are taking about the Fusion built in Grbl post? which does a lot of things weirdly (that included) Most of our customers do (and more should)...
Checkout =40']Search Results for Query: G53 fusion | OpenBuilds Basically, you either forgot to home (everytime you start), or don't have homing...
I finally got back to my workbee this week and had a chance to test the new Fusion 360 post processor for plasma cutting. It loaded easily into OB...
X = left to right Y = front to back Z = up and down . Does your GCODE contain a G53 Z0? If its out of fusion, set your start and end of job...
So WCS 1 in Fusion 360 correct? Fusion has a grbl.cps and I used it. Post Library for Autodesk Fusion 360 | Autodesk Fusion 360 Code using the...
Then that'll be Fusion's G53 (machine coordinate) move. That moves to where you HOMED the machine. If you don't have limit switches, how is kind...
The simulation looks good. Z starts cutting in the air and then moves into the work piece as intended during simulation. During live however,...
I believe I have discovered a small bug in the BlackBox post for Fusion360. The post is inserting G53 after G54, rendering the WCS useless. Or...
I am using Fusion 360 with the OpenbuildsFusion360PostGrbl post process. I keep getting an Alarm Error at the following location: G90 G94 G17 G20...
Hi Sharmstr, thank u for your prompt response. After your message I’ve checked for ‘homing workbee’ on the web but seams I need the limit...
Hi Max and welcome. Make sure you've homed your machine and that your part Z0 matches what you've programmed in Fusion. Also, I notice that your...
If homing is set up correctly, nothing should need to be changed. Did you read the thread I linked, because the behavior sounds similar? The...
i turned off BOTH hard and soft limits and now the job did in fact run but now i have a broken limit switch... guess i have to take the good with...
Hello World job = good Machine profile = good How you assembled the machine, is switches in the correct locations, did you cross any wires? =...
That G53 G0 Z-10 is supposed to be comfortably above the workpiece. If not, that big XY G0 move afterward will do exactly that. It's only getting...
Thank you for the reply. I changed the commands all back to -10. From what I can tell all the GRBL settings appear correct. The spindle moves...
You need Grbl compatible GCode - what CAM are you using? The Gcode above contains invalid commands like G70, that is not supported by Grbl: See...
The G53 (machine coordinates, not work coordinates) shouldnt hit your limit switch at all. That's the point of using G53 and not G54 for the...
First of all, the Fusion 360 post is amazingly well thought out... down to the router speed selection! That said, how on earth do I eliminate or...
