Separate names with a comma.
Some features disabled for guests. Register Today.
then there may be something wrong with the BB itself, time to contact the store who will help you diagnose the hardware
then it is critical that no gcode program should ever be missing a header G20 or G21 code. NEVER. (always set the modals to what is needed in...
that is not what I said..... it can be used with the Blackbox 4X but only for probe X - from ONE side probe Y - from ONE side probe Z - really...
online builder does have the option. give it a try (-:
the manual says it accepts PWM as 3-12v this means it has an optocoupler on the input, which may be biased by a pullup resistor. I see on the...
I did not deliberately select a direction (-: Climb milling it generally good for metals, conventional is good for plastics and foams, but it does...
Here is a diameter first mode hole drill operation. 0.6mm bit, 2mm diameter hole, 33% step over [ATTACH] Note that this cycle (diameter first)...
surely this is already sorted by using the OpenBuilds postprocessor? docs:software:fusion360 [OpenBuilds Documentation]
I will SketchUp Make 2017, the free version is all you need. Sketchup Make 2017 (Last free version) SketchUcam is free Releases ·...
I see the manual says 3-12v on the PWM, which means it has an optocoupler on the input, and THAT will have a bias resistor which may be giving you...
the controller will turn off the PWM output when it gets a M5 command when it gets M3 S0 it is also essentially off M3 S1000 will output a...
Thankyou In light of this and having reread the Gcode you posted, which only moves between -0.005 and 0.005 in X and Y, which woudl be a 0.7mm...
I need to know more about the entire system to understand how exactly you are achieving such small movements. motors (200step per rev),...
almost any 3D printer limit switch will work too, though you may need to use shielding wiring or otherwise add filtering to prevent EMI.
those come from the machine setup, what are your GRBL settings for max travel? settings $130 to $132 mine look like this on this test controller...
did the gcode have any G53 moves? previewers typically do not know how to handle those
in what software? in OpenBuildsCONTROL you can select the WCS using the dropdown arrowed below, and of course the GRBL firmware in the Blackbox...
it is time to contact the store Support Remember these forums are for casual member to member community help. if you have an actual product...
2 pin power plug on the laptop? turn it over, sometimes helps
then you have recourse to the store support system Support remember these forums are free support from community members to community members....
