Separate names with a comma.
Some features disabled for guests. Register Today.
ah so, plasma. (tell us the whole story in the fist place and it makes life much easier) the OpenBuilds Fusion360 postprocssor does support...
Typing in commands will cause regular crashes, much better to use jog buttons and jog slowly (if continuous) or jog in known increments If you are...
do NOT use G92 yes it creates offsets (sets your displays to 0), that may be useful in some cases, but it creates GLOBAL offsets that mess up...
with the BlackBox you have, the 4X model, you will only be able to probe X and Y via Fusion360, not a ball/hole/boss. but if you probe the edge of...
I have made some progress adding probing to the post processor for the 4X Blackbox. It will only be able to probe X and Y faces since we have no...
it is in whatever mode tha tlst Gcode set it to. G90/G91 are part of a modal group, things that once set, stay set until changed. Gcode generated...
neither. machine home is set when the controller turns on (can be useful, see later) and then again when the home cycle is run (best) and it...
I understand that when you connect the magnet from the probe (which has 5v DC on it) to the spindle, the Blackbox then says 'probe connected' and...
no, CONTROL will not talk to Marlin. You will be much better off with a Blackbox, much better drivers, standard GRBL firmware, OpenBuildSCONTROL,...
you set up the machines GRBL settings maxrate numbers to rates that the machine can safely handle. After that Gcodes G0 moves are at that maxrate,...
I would flash grbl from openbuildsCONTROL (select blackbox 4x), easiest to do, and will work fine provided you follow the wiring for GRBL1.1
yeah, CAM is available at all levels, but some CAM is not available. free/student does not do 4th axis free does not output rapid moves (maybe...
that is a 4x for that probing will have to be built into the CONTROL software, only a limited amount of probing can be done via Gcode. can do:...
some things are easier than others. Fusion360 is very powerful but is also more complicated. how about just flat 2D drawings? easy, right?...
if you have fusion360 on an actual licence then you can partly ignore this.... if you have it 'free for personal use' then you should be using the...
do not use R format arcs, anywhere, anytime, just don't <-: so prone to massive errors, just not worth it X32 shoudl do a circle ok with IJK...
no need to rewire motors, the GRBL settings for axis direction will fix the basic directions then the settings for homing direction will fix...
this is wrong, something has reset your GRBL setup 1 - turn homing off 2 - set axis drirections so that X+ moves right Y+ moves away Z+...
which is why I use an optical sensor.... Optoisolated Z probe and I also think that the XYZ probe plate should have an optoisolator and battery in...
I use a fishing scale to pull my belts to 12kg tension, making sure all the belts are the same tension. This removes the guesswork from belt...
