Separate names with a comma.
Some features disabled for guests. Register Today.
they do work correctly, but everything else has to be done right first. they would help but some elementary thinking on your part can prevent the...
now GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with OpenBuilds Machines running Grbl 1.1 file...
the new one that I sent to Mark for alpha testing does...... guess we just need to let it out into the wild....
I would buy an ESP32 devkit board, program it, and wire it directly to the existing drivers and keep both those drivers and the existing power...
soft limtis will give you fits, turn it off (-: always home after power cycle or reset. you can check the offsets by issuing a $# at the serial...
this points to too high max speed/acceleration on Z. on the short moves it does not get going fast enough to fail. fundamentally stepper motors...
You are clearly confused by all the Gcodes that you don't fully understand yet so lets just stick to clicking buttons (-: 1 - turn on machine 2 -...
I would burn aligment holes in the corners and stick dowels throguh the holes to align for gluiing
take the K for example. the kink in the vertical edge on the left is where the Gcode starts and ends, it approaches from the left, starts, goes...
please attach your Gcode
anything above retractheight will be rapid, this means that small positioning moves at the bottom of pockets and slots will still be slow, very...
Are you using the Openbuilds postprocessor for Fusion360? docs:software:fusion360 [OpenBuilds Documentation] (edit: just realized I said Z when...
and check the tram too
you will be happier with changing the Z so the channle stays still and only the plate holding the router moves, like the Sphinx. I have the...
care to post a link to this outback machine so we can see it?
please send me your sketchup file and tell me what spacing you are aiming for and so on so I can replicate what you are trying to do.
not just part of the controller but part of the entire Gcode ecosystem. what you are trying to do is just not part of what Gcode does. Gcode is...
oops, this is the video i meant to link to [MEDIA]
Think about how the tool is rotating and which direction the tool is pushed by the cutting force when it is cutting. If the tool is cutting away...
Hiya the advanced FLOOD mode of the pocket tool can deal with island inclusions, did you try that? press the HOME key to activate, then you need...
