Separate names with a comma.
Some features disabled for guests. Register Today.
Peter that list in the docs is missing the spindle direction light (6 listed, 7 lights) and that image is not exactly readable, needs about 20%...
our fusion post will handle coolant codes for you without modification.
wow. so, go and grab the master.zip from GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with...
so Z lost steps when it raised up, at some point. this can happen when it rapids up, and the solution is a simple 2 parter: in the GRBL settings:...
I think I have a solution up my sleeve, will work on it over the weekend.
if you jog 6 inches does it jog 6 inches?
Homing does it all for you! The setXzero/SetYzero etc buttons set offsets from home, which the controller remembers. When you turn the controller...
it is not hard to allow XZ and YZ arcs in the post, but the big question is how big are the arcs. They were turned off because Fusion likes to...
hmmm, in wood, stepover does not need to be smaller than 5 to 10 steps that the machine can actually do. for most leadscrew machines this means...
I would check all the mechanics first, on a long carve it is likely that chips get into the wheels/V slots, or even into the leadscrews. Any...
first, turn off Capslock, ALL CAPS is shouting on the internet <-:
what software?
hehe, Peter, you never tell people where those files to cleanup are, so for reference, they are in...
set the GRL setting 'step idle delay' to 255 [03:42:36] [ $$ ] $1=255 ;Step idle delay, milliseconds this prevents the motor drivers ever going...
"all your data safely in the cloud" is a phrase that strikes terror in me and most people in Africa. on any given day there is no guarantee that...
those pictures indicate missing steps, in Y I think. check X and Y for sticky spots/dirt/adjustment of the wheels, sticky spots on the leadscrews,...
read it more carefully, is a WARNING not an error. The post uses G53 moves which rely on proper homing and since we had a lot of people...
probably, have you tried?
gcode works ok for me but I predict you are going to have problems in the future because that Gcode has no header that sets the modes looks like...
first, are the switches placed on the correct axes? ie the switch on X shows up as the X switch in the test screen? and same for Y and Z?
