Separate names with a comma.
Some features disabled for guests. Register Today.
no reinstall of anything, Blackbox is a grbl /grblHAL system and bCNC is a GUI for grbl and grblHAL.
for flat parts Sketchup Make 2017 + the SketchUcam plugin is a very good, simple solution....
I use a fishing spring balance to pull the belts to the same tension. I use 12kg. This makes sure that they all stretch the same amount. After...
it has to do that so you can see what the plugin is doing since it uses colors to distinguish the types of cut, this is how it works.
any advice, @rcKeith ?
also look at bCNC which is entirely Python and accepts Python plugins
by 'configure the servo' I meant the hardware connection, where the arm is on the servo spindle. Each brand of servo has its own direction...
GRBL settings $30 and $31 set the limits of the S words. The default is $30=1000 and $31=0, which means that the S values can run from 0 to 1000...
this is happening because you are using long filenames a short filename (to Windows) is a maximum of 12345678.123 since your filenames have .gcode...
in .354 I am seeing --0.5 in the framing pass sections (0.5 is the pass depth), waiting for update to download.... .355 is ok.
I saw the brass block move, is that what was intended?
well, there will be more delay since my mother has been in hospital for some weeks and life is highly random, and no, the shower is not done yet,...
in line 217 shouldn't the 'Z-5' be Z[-tc_seekdistance] ?
well, 'run job' is enabled, so, 'stop job' is disabled because a job is not running (-:
The CAM needs to know the cut speed (it does) and how fast your machine rapids (it doesn't) to get this accurate.
Assuming you are using OpenBuildsCONTROL and have homing enabled and are using it, then see my post for that-jim at INTERFACE controller go to...
the worn brushes makes more sparks on the commutator. more sparks means more electrical interference (EMI) is transmitted. and that is what caused...
This was bothering me too, especially in gcode generated by SketchUcam, so I modified it and the most recent release will always start the job...
this is not a problem for GRBL as it has been tested thoroughly on the Uno. The new Blackbox X32 uses the ESP32 processor which has a lot more...
you need to infect a township comittee members with the CNC bug, then you can do anything you like (-:
