Separate names with a comma.
Some features disabled for guests. Register Today.
this is the problem ((Drawing name : AtlantaBraves/Georgia georgia pocket 1/4 fix) (screw up v1)) (Program Name : scrw up) too many brackets!...
yeah, had to reset to get mine to connect to wifi after I set the details.
it cant work because the blackbox has it's own drivers built in, and they are for 2 phase motors. you have 3 phase motors and drivers to match...
i claim age related memory loss....
grbl 0.9 not equal to grbl 1.1 (-: OBCOntrol likes 1.1 1.1 has slightly different pinouts, but it is possible to compile it with the correct...
to be clear, $4 has to be inverted on the Blackbox - ie this is the default in the versions of GRBL that OBCONTROL will install in the controller...
GRBL supplies PUL/DIR signals The blackbox has drivers for 2 phase steppers built into it and does not have a pinout for PUL/DIR so how are you...
please post only the pocketing operation that failed and attach that Gcode file here so we can check it for problems.
I loved TurboCAD back in MSDOS days (-:
don't forget to review the resource on calibration HOWTO Calibrate your CNC Machine for MACH3 or GRBL but using the OBCONTROL calibration wizard...
just write a little Gcode G21 G90 G54 G17 ; always set the modes you wnat and need G0 X100 ; move X from 0 to 100 M30...
if you are just drilling holes then why not use Sketchup (Make2017 free version is great) and SketchUcam? SketchUcam has a hole pattern wizard (-:...
I wonder if the wheels on one side should be allowed to pivot? That would account for any irregularity in the floor surface and maximize the...
I don't know anything about durometer but have cut various kinds of rubber and foam and can speak about bits. SHARP, very sharp, and have spares...
nothing wrong with .338 here so my guess is something wrong with your usb cable or PC. move the usb cable away from allother cables and restart...
well done!
that is weird could be the plugs or the connection to the plug, make sure the wire goes into the correct gap in the plug when the screw is...
hehe, I get it, spindles don't take hostages, just like table saws. The power off switch is your friend, so is a checklist for running jobs,...
I am wondering where would this rogue signal come from? When the pin on the blackbox is low it is driven low, not just floating around about low...
router UP is the Z axis 0!!!!!! that way the Gcode can do safety moves at or near Z0 and avoid hitting things on the table. for more info Home,...
