Separate names with a comma.
Some features disabled for guests. Register Today.
dirt on rollers? acceleration too high?
nope, it is labelled 'Mode' and since ESP32 chips need a particular pin held low in order to boot into 'flash new software mode', that is probably...
yes read the grbl wiki github.com/gnea/grbl/wiki about communicating with GRBL I would tend toward a pair of ESP8266's for bidirectional comms.
please post your Gcode file so we can review it
Peter I think he already has a suitable XY version of GRBL, as per above.
before homing (turn it off in the grbl settings) you must make sure the X and Y motions are in the correct directions. You do this by using the...
the answer is "use 8mm ID bearings" (like everyone else does) (-:
briefly, the main things are x32 has: 2 relay outputs (BB has 1) XYYZ or XYZA driver configuration, where A is a rotary axis (BB is always...
then you only need to set the X homing pulloff distance to the correct value. Then it will home and pulloff to the settting you want, then home Z
Hi Roger To upload the pictures click the 'Upload a file' button at bottom right of this reply box (on a PC, a phone/tablet will have a button...
Homing is a fundamental stage of a machine 'coming alive' and there is no way to run Gcode between X homing and Z homing because the Gcode will...
no, I don't think we want it to home the moment it resets or powers up. what I want is to power up in an alarm state, can only home before...
here is one $65=<boolean> : default 0 (off). Require homing sequence to be executed at startup(?). Replaces #define HOMING_INIT_LOCK.
and, oops, you linked to the old wiki which may not have all the current settings. The whole project moved and got reorganized a bit, so here is...
OpenBuilds CONTROL dispalys them quite nicely but does not provide all the definitions, so you will need the wiki as you linked it. There are some...
non english characters in the filenames? or anywhere else they might make it into the gcode?
please post a picture of your controller and probe. at a guess I'd say black to ground and white to pin A5 BUT first check really carefully that...
Anyone of the LEAD machines will get you started. Get the kit, get it working, get some experience cutting christmas ornaments, then modify for...
set the spindle start time delay in the postprocessor options. If you hover your mouse over each option it will pop up some help, read them all,...
Yes, I believe so, since the clamp itself can flex (everything flexes, I can measure flex in my cast iron lathe with just fingertip pressure,...
