Separate names with a comma.
Some features disabled for guests. Register Today.
Must be something about the way you have set the heights.... how big is the stock? (does Fusion have the same stock?) Where is your WCS offset in...
hehe, technically it does log the position, just in Gcode (-: (I convert the Gcode to a DXF then modify that in Sketchup before generating new...
HOWTO Calibrate your CNC Machine for MACH3 or GRBL
note that bCNC also has a bunch of buttons for adding drilling, pocketing etc, so you can digitize an outline and then add a pocket or flatten...
You can do that with bCNC GitHub - vlachoudis/bCNC: GRBL CNC command sender, autoleveler and g-code editor I mapped some function keys to the...
I found a few solutions on youtube, in no particular order.... [MEDIA] [MEDIA] [MEDIA] [MEDIA] [MEDIA] [MEDIA] [MEDIA]
Yes. The interface to the BB is a USB/serial connection, and you just send it Gcode commands. The Gcode commands tell it laser power and...
(This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z0 Z0 is always going to hit the limit switch, that is why...
The SketchUcam plugin for Sketchup adds a G4 P0.1 after every servo pen movement. This forces synchronization with the command queue, but may not...
you cannot probe during a pause so you must mean you are adding a probe macro after the pause. bit changing during a pause is very dangerous, an...
Excessive Z axis retract which, oddly, describes the how and why of homing (-:
Do remember to HOME the machine.... and those max rapid rates? 16+meters a minute for real? Set these to the real travel lengths of your...
the generic answer is use the post that outputs the simplest possible , plain Gcode. No toolchanges No drill cycles or other cycles, just plain G1...
While it is possible to calibrate an entirely unknown system (1), the process is simplified by making a few assumptions to get a starting point....
You are using an older version of the postprocessor, please upgrade as soon as you can from Releases ยท...
please read Home, Fusion360 and G53 Z moves
too hot I think, the foam will melt back far beyond what you want, hard to predict
a stepper motor can easily generate more volts than your power supply outputs when you turn it by hand. so disconnect the motor, or turn very very...
put a counterweight on the head to support the weight. just a pulley above the head and a rope from the head, up, over, down to a weight that just...
[MEDIA]
