Separate names with a comma.
Some features disabled for guests. Register Today.
As Shawn said, xmin and xmax are within your material max 291.519 11.47" min 11.868 0.467" note that your x0 y0 point is therefore about .5...
Please attach your gcode file and tell us what size your material is.
which just means they are enabled all the time.. but they do have it called 'motor free signal' in the docs connect all the - pins together and...
sorry, yes, I was running Ubuntu 20 on the Pi4, I did not make that clear. The moment Ubuntu for the pi was out I had to try it, though I would...
what files? you just draw it in Sketchup/CAD of your choice, generate Gcode using CAM of your choice, and cut it on the router. (-: That is...
I see this... [14:08:13] [ $$ ] $122=0.000 ;Z-axis acceleration, mm/sec^2 0 acceleration cannot be correct. Yep, setting acceleration to 0 locks...
I have had an OX for some years now but have never tried creasing or drag knifing cardboard. I do want to build a dragknife for it.... maybe...
I did have it running on my Pi4 last year, cannot recall any details of problems installing, which indicates it was not difficult. Since then...
you just need a spring loaded pen holder, here is one made from plastic pipe and a balloon... [MEDIA] here is one made from MDF sheet (hint,...
Yes, you need the downloadable version, plugins do not work with the web version. Make 2016 or 2017 are ideal, no need for any version of Pro.
yep, acceleration time. that is why you always probe twice, 2nd time much slower. with my Z probe I have found that if I always probe at the...
surely $133 must be the same as $131 so the Y and A move exactly the same? other than that I cannot see an issue with the settings. Without...
Here is the popup from my Make 2017 free version [ATTACH] , since yours differs from this we need to know exactly which version of Sketchup you...
it looks correctly setup but is not being used to generate the gcode (the Gcode contains a T4 command, which the OB post will never do), so, check...
it is not the Gcode, that only contains 2 speed instructions, both for 24000rpm. BTW: You did not use the OB post for Fusion, it is much better...
CTRL+SHIFT + will expand the display. the '=' is unshifted, the '+' is shifted
um, no..... a G0 move should move at 10000mm/min according to your $110-$112 settings. a G1 move will move at whatever is set by the F word, G0...
a new bit should do fine, I would use a single flute 3mm.
if you feel the cutting edge with a finger (power off naturally) and you are not scared of it, it is beyond time for a new bit (-:
if you have to use the handwheels, then SLOWLY. the faster the motors spin, the more voltage they produce, and that is what kills drivers.
