Separate names with a comma.
Some features disabled for guests. Register Today.
Peter, I noticed in the OB probe video that when the "hole" was probed for bit size, it flashed 6 times but the posters vid only flashed 4 times...
What are the numbers for those settings?
Sounds like the Leadscrew lock collars need moving to take up the backlash on the X and Y axes.
Measuring the bit size is a fundamental of CNC router machining and should always be checked and implemented in the CAM program when tool-pathing....
Your X axis is the problem. - adjust the V wheels that ride along the "X" C-beam
Not 100% certain what exactly you mean. However, as far as the first question goes, {Can anyone help me figure out how to copy both sides of a 2...
Storing the router cable in any form with the other wires in the drag chain could be problematic. Best to hang the router cable, in its sheath,...
If the probe does not work in the proper configuration {magnet to signal and plate to ground}, then the shield circuitry is maybe where the...
Sounds like the router bearings.
Steve, you needed to get the axes set up square first (as per my post) which you've now done. Regarding the noise, did you check out Peter's...
Maybe your best bet is YouTube if you're a hands on guy?
Here's an old one of mine... Building a machine is a journey, not a destination!
If the frame is square then that job is done. To even up the discrepancy you have at the front of the machine, drive gantry forward to the front...
MDF is the ultimate test because it's very machinable. I would do a test on a piece of (fresh and dry} MDF and see what you get. The "W" you...
It's difficult to see how this could be a problem with OB control. A long shot, but are you saving files in different places i.e. one on a flash...
If you are using C beam then its not just the leadscrew you have to worry about, but also the wheels which must run perfectly aligned with the v...
Remove the X stepper and the flexible coupling. Remove the bearing{s} from both ends of the leadscrew. Loosen the lock collars from both ends of...
Check the grub screws in the flexible couplings are nice and firm - especially the Y axes. When a machine is under load, there is the possibility...
Did you go to "Settings" and "default browser" in Windows and select Google as your default?
Quote: Compared to the drawing dimensions, the diagonal dimensions are about .5mm under-sized, and the Y to Y dimension is about .25mm over-sized....
