Separate names with a comma.
Some features disabled for guests. Register Today.
You're using a 6mm "drill"?
=32"]Search Results for Query: wall mounted cnc | OpenBuilds
OK, assuming your machine is calibrated and has no slop in the axes (an absolute must).... Measuring the diameter of the bit is the first step -...
Are you seeing "saw tooth ridges" or just varying depths of cut?
Yes, a shop vac will appear to hold down a sheet of material but lateral forces from the cutting bit will compromise it. A proper vacuum pump is...
I hadn't thought of that "dry erase" stuff. Will have to give that a try myself, thanks!
Hi Craig, On the odd occasion I use a drag knife, I usually use a sheet of thin MDF as a base - ideal If you're using a Roland style drag knife...
Check the system tray (bottom right of screen) - click the UP arrow there and right click on the OB icon I assume WIN 7 is the same but can't...
Just tried it, seems ok my end. I would delete all instances of OB control, then re-install a fresh copy.
What puzzles me in the video is that when you pressed "reset zero", the DRO did not go to zero as I would expect. Maybe an UGS problem rather than...
Have you downloaded the machining videos from Vectric? Tutorial Browser - Aspire | Vectric Here's one of them... [MEDIA]
Right here on Openbuilds here... https://www.youtube.com/playlist?list=PLDeI80MYQtboqJDGEPY0yR_Exh91XI95- or here.. CNC ROUTER | OpenBuilds
Your calculations follow the formula perfectly Kyle although I'm guessing you have probably had to "massage" the chip load somewhat. Taking the...
That's not the point Michael. Its like trying to learn how to drive a car with someone else behind the wheel. We were all in the same boat at the...
Come on Michael, make the effort to learn. Everything you need is out there in the digital universe!
One thing's for sure looking at that pic - there's a mega problem with your mechanics somewhere. The right side wheel has lost a lot of tread from...
Oldie but goodie.. [MEDIA]
Arthur, have you looked at the video on the Mozaik website? At about 4.03 mins, it shows the tab for feeds and speeds etc. Home
Not familiar with an Arduino Axe, but those pins connect to an Arduino Uno as follows: Dir uses digital pins 5, 6, and 7 on the Uno Pul uses...
In what way?
