Separate names with a comma.
Some features disabled for guests. Register Today.
I set the XYZ Touch Probe Plus at the left front corner of the spoil board a do a xyz probe with a 1/4 end mill. Then put in the spindle a...
So I went to Face a new spoil board and set it to 1mm or 1/32in and it removed 0.115in or about 3mm I even ran it with 0 stock to remove and it...
When I post process to create the g code the last 3 code blocks are not the same as the first 6.
Already did look up test v9 f3d
I looked at the video and the center 3 were done following the settings. Half the feed rate with a full circle at the end. The last 3 were not....
yes
The problem with that is is that it doesn't slow down sometimes it will go full feed rate randomly. I have a video showing what it is doing. It...
Fusion 360 for CAD and Cam. Using Bore which does a spiraling helical cut and stays in contact with the selected hole surface, For example I would...
So I went over that machine and I can't find anything wrong with it. Good news is the holes look really good but they are always a bit...
on the left is a circle on the right is what my machine (lead 1010) is doing.
Ok but does the direction of the egging indicated the problem is in or with the right side y axis assembly?
Hi. My lead 1010 used to make perfect holes. Now all im getting is oval or egged out holes. Something has obviously loosened up or moved and Im in...
That worked. It's only off now by 1mm Thanks man you are super helpful. I remember now, you explained this to me like a year ago but I forgot....
So 200*(711.2mm / 717.55mm ) = 198.23 ?
Hi. Hoping you guys can help me. What is the calculated steps/mm for a 1040mm ACME lead Screw? And just to let you know I don't have a computer...
ah ok thanks
Here is what the g code looks like out of fusion 360 for me. G90 G94 G17 G20 (Operation 1 of 1 : pocket) G54 (This relies on homing, see Search...
Ok thx.
Yes I use Fusion 360. I use Open Builds Post Grbl in Fusion 360 when creating the G Code. Works perfectly. Executes jobs perfectly. Not a...
Also wanted to ask how to set properly Work Piece Zero along the Z axis. It is first plunging into clamps and stock before moving along the X and...
