Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks Shawn, this is exactly what I was looking for. Do you happen to know the default measurements for this probe? I'm curious if there was a...
I'm getting my Z dialed in and I've got the steps spot on. I'm finding the probe plate measures at 9.08mm and I'm getting a repeated variation of...
Here's the latest version with Fusion 360 file attached. Using advice given here and some other changes I think it'll be an upgrade. HGR20's on...
@Netechsys How are those 1604's working in regards to speed?
So two 15's on the very bottom and very top position of the cbeam and possibly a 1/4" plate or two somewhere on the back side of the cbeam?
Thanks, Rick. Anyone have some input on MGN 15 or 12's? Since I'll be using four I could probably use mgn12's.
I'm converting my LEAD1515 to a 1010 with linear rails and a 1.5 spindle. I'm trying to decide between MGN15's or 12's for X. Also, would I need...
I think I figured this out, with everyone's help. One of the thrust bearings had a tiny gouge in it. I didn't see it when I inspected it the first...
Is it possible for a 1500mm leadscrew to become bent enough to bind the axis? Where I'm at: eccentrics fully open, I can spin all wheels...
On to something here. With machine off I can rotate screw coupler by hand and it moves freely to the right. When I try and rotate it left it's...
It's all OB stuff and has worked flawlessly with the speed settings. I lowered all the X speed settings to a turtle crawl and it's still showing...
Is that not set by the X max speed and X acceleration?
1515, It seems to home in all axis fine but when I jog X to the left it'll suddenly stop and it sounds like the stepper is crying. I've triple...
Thank you both for the responses. I currently have a lead 1515 but I'm looking to downsize the footprint. I'm leaning towards modifying it similar...
Does anyone have a 1010 fusion model they'd be willing to share? I see all the openbuilds parts via Grabcad but thought I'd ask before I started...
What would be the benefit in utilizing ball screws instead of lead for this machine? Speed, accuracy, etc...? Would the cost and labor justify the...
Thank you, Peter.
I recently purchased a used CO2 laser cutter and it has the Ruida controller with 5 DM542s external drivers. I'm a huge fan of the Blackbox for...
Thank you for the feedback, Rob. I have a love hate relationship with Fusion but I'm still learning. I need to go back to the basics with surface...
Sounds like this explains what happened. First adaptive path then contour. I must have switched the two. I appreciate the input.
