Separate names with a comma.
Some features disabled for guests. Register Today.
I've never clicked that red arrow on anything. You showed it needs to be done on chamfering, thank you. Does that red arrow indicate right vs....
Just tried with the 3.175 contour path and when I change the red arrow direction it mills out a lot more material than the other direction in the...
That worked, Rob. I changed the offset width a bit but the simulation now shows the tip of the bit just inside the path, not directly inline. I...
Thanks, Rob. I was just responding with another perfect example of what's happening. I've used that bit (60deg vbit) for chamfering in the past...
Thanks for the responses. I'm 99.9% certain I changed the bit diameter when re-probing from the 6.35 to 3.175. Good to know I don't have to...
I've made a few of these guitar trays but haven't run into this. The fusion file and toolpaths seem correct but when I did the first contour it's...
I've had my LEAD for about a year and have no complaints. It's a workhorse and I've put it through it's paces. What is some routine maintenance I...
Thanks, Peter. So it looks like parallel would be blues to yellows and reds to greens to get one reversed?
Can someone point me to a wiring diagram for two open builds nema 17's in series, please? The colors are a bit different then what I've found on...
Unless you have the high Z your dial indicator probably isn't going to rotate around 360 degrees. Even if it does these machines don't have fine...
The cutting area is different than the actual surface area. I put the additional spoilboard on mine to accommodate a bunch of functional t-tracks...
You delete the other post? Yes, loosen black corner connectors and use thumb screws to adjust Z c beam. The thumb screws are essentially shims....
I tapped the two holes shown and put small bolts through the back side. There wasn't enough adjustment through the uprights and it's too hard to...
I've got the same machine and Router11. My collet is very snug and I'd agree it has loosened up over time. Experts can chime in but I don't think...
User error. How are you attaching collets? If you're having to use a hammer you are doing something wrong. What machine do you have? Chances are...
If by jog speed you're referring to max rate $110, $111 I have my LEAD 1515 with high torque steppers set to 3900mm/min and it zips along fine....
This looks great, @Giarc . Curious, do you use pro or desktop and why? For the storm trooper head how many toolpaths did you use for one side? I'm...
If your tram is off you’ll get this result trying to mate parts.
I use Fusion for everything but I wouldn't recommend it for 3D carving. It isn't friendly with STL files and has a 50k "face" limit. There are...
Long story short, Tom Brady had me hyped up so I thought I could take a 10mm depth of cut in some oak. Rooter11 thought otherwise and entire...
