Separate names with a comma.
Some features disabled for guests. Register Today.
Ok, I restarted everything and the goto is working now. Was the goto button somehow trying to do a G0 X0 with G91 active from a previous command?
The goto X0 or goto Y0 functions from the DRO drop down are not working for me. I'm using control v1.0.342 and grblHal 1.1f on a BBX32. Here is...
A regular scoket head screw would stick out a bit, but it has a larger and deeper hex. That would be a bit better in some ways. You might find...
Contact tech support they can give you instructions on a fix for the incorrectally wired relay.
not positive but you might set incremental or absolute before you send the G38.2
Thanks for this link, I will check out the example config on bdring's github.
Ohh... I see it in the changelog now 'Basic FluidNC connectivity support'. This is cool thanks for including this!
[ATTACH] I was goofing around with a ESP32 that I had tried flashing with a few different things (grblHal, grbl_esp32 and fluidNC) and I noticed...
If you use this configuration the router or spindle is enabled with the Black box powered off. If you accidently move a STEPPER MOTOR with the...
Thanks, I only designed the three plates that for the z-axiz upgrade. the original plates for the machine came from blue ox solutions. I used...
Yes this would make the speed dial on the VFD operate just like the speed dial on a router, you will have to remember to set it correctly for the...
I will send you a message.
I am reusing the lead screw that I have. The existing lead screw z-axis worked well but the way it was built took up a lot of the z clearance. The...
that-jim published a new build: Z-Axis Upgrade For My Sphinx Read more about this build...
No matter whose advice you take, you are wise to explore all the options and learn how the machine works. Take your time.. The following set up...
I can think of one way to configure the bb and vfd that you give you relay control from the bb and manual control of the speed from the vfd. Would...
I think full speed (24000) is the only option from the interface.
In the resource I linked I do suggest a switch rather than a jumper, this would "disarm" the spindle. I understand being hesitant about flashing...
If it's a hy series vfd try this HY SERIES VFD AND BLACKBOX SET-UP OPTIONS Hope it helps.
It would be a shame if you accidentally wrapped up the old one. Just saying....
