Separate names with a comma.
Some features disabled for guests. Register Today.
Maybe its obvious but one item that you could add to your list is that the X32 will likely get new features added to it and the 4X will probably...
I would be very happy to see a semi automatic tool change. I'm hoping for the kind of thing where you make one gcode file and control would prompt...
I received my new Black box X32 the other day and set it up to work with my machine. I have a Huanyang HY series VFD and thought I would share...
Ok, I have submitted a ticket.
I am wondering if anyone from openbuilds has been able to verify what I am seeing with these relays? Sure looks to me like the relays are not...
The relays on the blackbox x32 that I have are not working as I would expect. With no power to the box 'relay 1', marked NO has continuity...
Peter if you are still listening to this one you might check out $22. when I set this to $22=5 OpenBuilds Control went in to an unknown alarm.
Thank You! The OpenBuilds control shows $22 a boolean setting, that is where I was getting confused.
Terjeio, thanks for the message but I do not understand what you are trying to say and I am not using io sender. what $ setting do I use to...
I agree, starting in alarm is what I want. I thought that this is what require homing meant, I have tried $65=1 and $65=0 and I don't start in...
$8 shows up in red, not is wiki $65 shows up in red, but found it in the wiki $65=<boolean> : default 0 (off). Require homing sequence to be...
Thanks, just wanted to make sure I am using the correct wiki.
Is this the correct place to find the definitions for the extended setting for grblHAL? Additional or extended settings ยท terjeio/grblHAL Wiki...
Dave's hole in the waste board sounds like a good way to go. You could set up a machine to cut several at a time, that might be productive. Just...
This is really nice! I just updated OpenBuilds control and I see the option to connect to a controller via Wi-Fi. I think I'm going to have to buy...
My guess is that at 1000mm wide it would be reasonable for wood and plastics similar to a lead 1010. I built this at the smaller size because I...
If it helps, I am using the 6 pack with DM556T external drivers, a 48v power supply and the openbuilds high torque nema 23 motors on a machine....
If you have had multiple VFDs fail I would double check all of the basic electrical parameters that you are setting in the VFD. The parameters for...
I have a couple of 1.5kw air cooled spindles on different machines, I run both the acceleration and deceleration at 5 seconds. I have looked for...
You might look at PD 70 the settings are different for using the onboard control and using the 0-10 input.
