Separate names with a comma.
Some features disabled for guests. Register Today.
I have a set of notes in the resources section that might help. you can find it here HY SERIES VFD AND BLACKBOX SET-UP OPTIONS
You could also use the black box relay to turn on a relay capable of controlling the router. If your up for a wiring project. This can be pretty...
I built a machine with 12mm rails and nema 23 motors works good for aluminum but it is not really heavy enough for steel. here is the build....
If you write the firmware to the black box with a programmer. you can avoid having pin 13 toggle at boot up. This is detailed in the GRBL code....
I would double check the the motor parameters like voltage and numbers of poles against any info you can get from the supplier.
With the configuration that most people use, you are relaying on the 0-10 to control the spindle. The 0-10 going to 0 volts is what turn the...
For basic stuff I like the free version of Carbide Create. https://carbide3d.com/carbidecreate/
I drilled with a smaller 'pilot' drill then came back and enlarged the holes freehand. This will last for a while but if you have a lot to do you...
I have used short off-cuts of extrusion as a drilling jig. kinda like this... [ATTACH]
If you have Huanyang HY series inverter here are my notes on connecting accessories to the outputs of the HY series inverters There is one...
What VFD do you have? Some have a relay built in that you can use whenever the spindle is running.
No, I maximized the window and the button was still to big. I just searched and saw that you have a macro for that I will check it out.
Thank you! I copied the key and pasted it into a text editor, where it was easier to edit.
Today I did something dumb... I was 'playing' with macros and I accidently pasted a long bit of code in the label field. The text that I pasted in...
I hope this does not come across as rude but you have to spend sometime understanding what the parameters you are changing are related to. You are...
I should have mentioned FOR light in your video is likely blinking because of the PD001 setting.
U1 1.0 is the software version you can display this by checking the value of PD181 ASR 1.0 I do not know what this is but I assume it is just...
Did you try testing Y and A/Y2 individually to see if they both report Y? Just curious because I think they define two inputs so you can use NC...
I do not recall having to set up anything for the switches and I do not have access to that machine. I think both switches report Y (not Y2 or...
I set one of these up once here is what I recall. You are looking for is Homing/Squared setting, you have to set the AxisMask for the Y axis. You...
