Separate names with a comma.
Some features disabled for guests. Register Today.
Ow come on, do you really expect me to get the Arduino and program it myself with GRBL 0.8/0.9, get a shield with 4 DR8825 drivers and adjusting...
Hello Adam, Bye some aluminum angle, 2*2 " or larger, cut it to length and drill 4 or 8 holes in it, that's the easy way. If you want to use only...
Hello Adam, Hard to answer your question, how precise do you want it to be? I can tell that you can feel the play it has if you use one...
I'm still working on the guide, but let me put up a picture so you can see how a low-cost CNC might look like (Routy GT2 BSX 290 V1.0): [ATTACH]
Hi David, Same here, A "axis/channel" (Y axis clone/mirror). I'm waiting for the 24vDC PSUs to come in to test the boards I still have here (3 of...
Start with the Ox, All NEMA23, GT3 (GT2 3mm), plates from Chris on eBay, go for the extra height plates, thus 4 wheels at the Z axis, 16 wheels on...
If you post in the wrong section it will delay a reply to your post, also the forum will be cluttered but a Moderator/Admin like Tweakie can take...
The 20*40mm V-Slot at the back, move it as far to the edge of the back of the side plates, put the 90ยบ corners to the front of it; this helps a...
Thank you Robert, The info you gave me is very useful to me. It seems that it's hard to get the feedrate above 2000mm/min with the long,...
Just SketchUp Make 2015. I've been using different 3D programs over the last 22 years and I like SketchUp the best. Been using it since January...
Hi Sean, Sorry I didn't see your post earlier. So, what budget are we talking about (in USD)? I made this build some time ago and it's one of the...
There are easier ways to see if things fit with CAD programs, it's crazy indeed to print all but darn it looks cool! :thumbsup::ROFL:
Why not put 2 of 40 or 60 mm at the extremes of the bottom so the gantry will be a bit stiffer? Also, still use one at the back of the gantry for...
There is no example video of that. You need to design a plate yourself that goes in between the 2 actuators. You might consider placing mini...
I can give you some additional info as well that I found were the best, they might be useful to you: Feed (up to): 2000 mm/min Voltage: 24 vDC...
I might not understand completely what you are asking, but controlling an actuator, single axis, is the same as controlling a XYZ system. We might...
Christophe, what dimensions were off by 0.6mm, and where? On the drawings or on the physical V-Slot itself? V-slot in general is well made and I...
If you place heatsinks than just put them on the DR8825 drivers themselves, but I use those boards without the heatsinks. A 45CFM 24vDC fan is all...
When you use a 24vDC PSU the motors will do fine at 1.2A per coil/phase, that's 28.8W! The motor is rated at 2.8A max current and the factory...
Alright! So they are out as shown on the SketchUp drawing. Nice, updating and passing the info, thank you!