Separate names with a comma.
Some features disabled for guests. Register Today.
I have an USB keypad usually used for people using notebook computers that don't have numeric keypads. I want to use it to jog the machine.
The uSTEP jumper settings are set at 8 uSteps. I found out from the Wiki that the Abort/Reset switch needs to be NO and that the E-Stop switch...
At the program, I used VCarve to create toolpath to cut a 5" square and a 5" circle. I saved the toolpath to GRBL code file. I loaded the file...
I used VCarve to create toolpath to cut a 5" square. I saved the toolpath to GRBL code file. I loaded the file into GRBL Panel. I did a "test" cut...
I finally got my CNC router working today using CNC XPRO board. I thought I need the 7.8A stepper motor drivers because the stepper motors that...
Can external stepper motor drivers go bad? There appeared to be slight burning smell and I thought it came from breakout board shown at PROBOTIX...
I got confused trying to wire the external stepper drivers to the CNC XPRO as shown at Hooking Up External Drivers to the CNC xPRO V3 The pictures...
I tried to connect the Smoothieboard to my CNC router that I built at home and couldn't get the motors to work. I tried Protoface and bCNC...
I tried to fix the machine but I think that PBX-RF RF Isolated CNC Breakout Board may be bad because the limit switches and the E-Stop stay on...
At the program for mentally-handicapped people where I work, I have a large CNC Router that my woodshop teachers got from a school several years...
You'll need stepper motor drivers shown at DQ542MA Stepper Motor Driver because the max amount of current draw is 2.5A on the Xpro controller.
Amazon is building a new distribution warehouse in Staten Island, NY.
Try one of these shop vacuums at Dust Extractors & Collectors.
I watched the wiring video and found out that there is serious safety issue. There must be a switch and a fuse on the AC input of the power...
[ATTACH] Which stepper drivers are those shown the in image? The ones that Open Builds Store sells are different kind.
If the brushes and bearings are bad, it's possible that the armature is bad. It's better to buy a new spindle than to fix the old one. If you...
Stop using that spindle. The brushes are bad.
If the distances are not same, turn off the machine and move the gantry on the side that don't have the limit/homing switch so that the distances...
Home the machine and use a ruler to measure the distance between the Y-Axis plates and the ends of the C-Beams. If the distances are not same,...
What's the green wire attached to the router for?
