Separate names with a comma.
Some features disabled for guests. Register Today.
I got it working. Picsender was sending a file with my xcarve settings upon bootup. I disabled it! Now it’s saving the stock firmware settings...
I’ll try this today. I think picsender is changing $4 for some reason and not sure why. Worst case I could use universal g code sender but I’m so...
I’ve been trying to use picsender since I already own it and use it on my xcarve. Every time I try it and go to home the machine, it locks the...
Everything appears to be solid and done properly. I am cutting the wasteboard in an attempt to add 6 t tracks to the board to make it easier for...
I checked that as well...bit size is perfect in Vcarve according to my calipers
So I did my first cut today. I’m trying to cut a pocket that is .76” wide and 30.75” long and .37 deep. My machine has been calibrated, stepper...
I’m planning on doing the same. I’ll pocket the t slots out of the actual wasteboard vs being on top of the wasteboard like my xcarve
Mark, Just finishing up the build and moving the gantry around, etc....are the stock settings very conservative? My belt driven x-carve has way...
I had other screws missing as well. I had some spares from my xcarve build but it happened at least 3-4 times during this build
That’s the motors just being on! All normal! Have fun!!
Interesting. I’ve only done wiring so far. Fired it up, moved the gantry forward a bit to finish cleaning up everything...booted down my computer...
$4=1 was the answer. Don’t know how that got swapped. Thank you!
Is “stop job” like an e-stop to the board? I was using my newly built 1010 today using a v3 stepper controller. Everything was functioning fine....
Just finished the build of my lead 1010CNC...everything is plugged in, I had power to the motors this morning. Went to finish zip tying all the...
I just see the Z being the possible weak link on this machine. I have a CNC4Newbies Z axis with linear bearings and a fast lead screw...its very...
Does anyone make a linear z axis like the cnc4newbies style? I have one on my xcarve and that thing is sold and rigid! Haven’t even finished...
Anyone have any thoughts on dust collection for this machine? I am about 2/3 finished with the build...hopefully will have it running by Sunday...
Mine showed up yesterday...the packaging is AMAZING lol...took me 35 minutes to get the rails out of the box...Can't wait to start this build! Dan
