Separate names with a comma.
Some features disabled for guests. Register Today.
If I disable 3D Viewer and I wish to load another GCODE file, the 3D Viewer helps me find out if I load correct file or not.
I'm not sure if the problems are caused by the 3D view window being opened or another program like VCarve 9.5. I don't have the correct specs for...
I think that the kind of router bits affects how plywood is cut. For thin plywood, a video suggested a straight bit instead of spiral bit.
When Openbuilds Control Software stops responding, I see either "web server or web socket is disconnected" in the serial console window. Why?
I thought that you're supposed to move the router anti-clockwise on outside of work piece and clockwise on inside holes of work piece. On my CNC...
Take the washer/shim out from between the wheel and spacer/eccentric and put the washer/shim between the bearings inside the wheel.
I think that NEMA 23 stepper motors require external stepper drivers.
I built a circle sanding jig similar to the one shown at Sanding Jig for Circles
Giarc, The problem is that two pieces have "spokes" and two pieces have "whitewalls". The "whitewall" pieces are glued on top of the "spokes"...
The wheels are made of six pieces of 1/8" thick plywood glued together. I have a Ridgit Oscillating Edge Belt / Spindle Sander but I don't have a...
The wheels are 2.5" in diameter. They are for a model car that I bought from MakeCNC.
I tried to use a drill press and some kind of sandpaper file (sandpaper cemented to steel plate) to true up wheels for model cars but I did...
I ordered the 1/8" collet from Elaire Corporation - Porter Cable Collets
I need long 1/8" router bits with 1/4" shanks because I was asked to cut out a sign from 3/4" MDF board. Regular 1/8" router bits with 1/4" shanks...
What about PVC expanded sheets?
I usually use 3mm and 6mm plywood to make model cars. I know that there are different kinds of plastic but I don't know which kind of plastic can...
I have been using Baltic Birch plywood from Woodcraft for model cars but I get rough cuts and broken layers (?). I use good router bits from Tools...
I found out that VCarve 10.0 is released. Should I upgrade from VCarve Desktop 9.5 to VCarve Desktop 10 for $90 or to VCarve 10 Pro for $350? My...
I made some test cuts and found out that the slots are too short for tabs. I have to draw lines in center of rectangles and delete the rectangles....
I lied to VCarve Desktop that I'm using 2.9mm bit and after generating the toolpath, all the slots show up on the preview window.
