Separate names with a comma.
Some features disabled for guests. Register Today.
I downloaded drawings for a model car that uses tab and slot construction. I have VCarve Desktop software and when generating tool paths, the...
I read the manual for an VFD and got confused on setting up the VFD. Most VFDs require 220V and both my house and the woodworking shop have 110V...
I know that there are two kinds of spindles with VFDs - air-cooled and water-cooled. Water-cooled spindles could be too much trouble because water...
The router on the CNC machine at the program for mentally-handicapped people won't run when I turn it on. I checked the brushes and found one...
I think that punching the shaft may bend the shaft.
2 spiral flutes on both 1/8" and 1/4" bits with 1/4" shanks.
Deep of cut is 3mm (1/8"). Plywood is about 12mm thick (1/2").
After I home my machine, I have to click on "Zero XYZ" button. After I use "Probe Z0" tool, I click on "Goto Zero XYZ" button before starting a job.
My feed speed is 60 inches/min. I'll try 30 inches/min.
Are there suggested feed speed for 1/8" bits on 1/2" plywood? I think the feed speed was too fast and broke a bit.
You can't use Mach4 to control xPro V3. You'll need Openbuilds Control Software that you can download from this website by clicking on "Software"...
Use "GRBL (mm)" postprocessor.
XHC MKX-V Mach3 Motion Control Card Breakout Board 2MHz Support Windows 7
Can you increase safe Z height? I think that there's not enough safe Z height if the rock/stone isn't flat. I think that the wiper motor doesn't...
[IMG] What kind of motor is this?
The bushings came today and they fit my machine perfectly (one was a little bit too tight). The hardest job was installing the two "hidden" screws...
I got camera streaming working between two tablets but I can't get it working between the tablet that has IP WebCam and computer running Windows 10.
Is it possible to set up two Android tablets so that one tablet acting as video camera send video to another tablet acting as monitor over WIFI? I...
After I click on the "Home" button (picture of house), the machine goes to the home position but the coordinates are not 0,0,0. This happens after...
Is it possible to set work or machine coordinates to 0,0,0 after homing the machine automatically?
