Separate names with a comma.
Some features disabled for guests. Register Today.
Still same. Flip probe upside down, place on table. Run CONTROLs > Probe Wizard > Z probe. Done. Zero is set off the table now. Remember to set...
See Lead 1010 4th Axis?
BlackBox X32 supports 4-axes (Wizards and tools > Firmware flashing tool > Machine style > 4 Axes > Flash to enable) We have a 4-axes post for...
Coolant port is 24v (max 3A). If your coolant pump is mains voltage instead of 24VDC, yes add IoT: see docs:blackbox-x32:connect-coolant...
If you do get a DC spindle/controller just avoid the ones the look like these, like the plague! We've seen their 0-10v section malfunction and...
Our machines does all those tasks with ease and speed, using our 8mm leadscrews. See LEAD1010, LEAD1515, LEAD PLASMA etc
Negative, 1605 and its ballnut will not fit inside C-Beam. Nor will it pass between the wheels (too large). Also, the increased weight and...
Check your PC NICs (network cards) one has a 10.x IP.. Disable/remove the IP. If your PC only has the correct IP it would default to it
Usually no, 1515 already has dual X rails. Maybe just dial down max rate, acceleration for Z in Grbl Settings. Make sure you adjusted Z axis...
No need. The dual nutblocks, mounted in slots do anti backlash too (just readjust them every now and then). That's why they are on slots, move...
For a 65mm air cooled 0.8kw - the more appropriately sized VFD spindle, a LEAD1010 will be fine. If you can do return and get the right one would...
Yes just clarifying the connections won't be BlackBox :) Also ARM for Grbl or whatever its called (unable to find a git repo, couple online posts...
Looks like a 3rd party controller. "Grbl for ARM" not GrblHAL, and BlackBox has never been ARM based either
Alarms generated by firmware, hosts just display them for you, read https://github.com/gnea/grbl/wiki/Grbl-v1.1-Interface to obtain a thorough...
So sorry to hear that! VFD vendor would be best person to ask, they all have slightly different parameters, but in essence you want to configure...
Good job!
OpenBuilds CAM is not wrong, those aren't joined up closed shapes [ATTACH] You can see its all seperate LINE segments, they aren't joined...
See docs:software:file-errors [OpenBuilds Documentation] Make sure to both close all entities in qcad (or any other good DXF CAD) and convert to...
Best to contact the store directly, via Support > New Ticket thanks.
Wrong way round. So flip $5=0 vs $5=7, whatever one it's now, you want the opposite
