Separate names with a comma.
Some features disabled for guests. Register Today.
It's actually an advantage to have the nut blocks tight initially - using the drill method above will bed the Lead-screw thread perfectly to the...
Well, you wouldn't expect it to cause problems, but something clearly has happened here. Yes, it's quicker to hit the big red button but in this...
Post the STL Bert for inspection.
Err, it's not an offer, it's a free download:)
Get Sketchup Make from my Dropbox... Dropbox - sketchupmake-2017-2-2555-90782-en-x64.rar - Simplify your life
I also use Design Spark pcb - also free and great for creating pcb layouts to send to FlatCam.
See Peters post above
What motors do you have on that machine? It sure sounds like its under a lot of stress.
Have you tried Sketchup? I've done thousands of designs using it, including 3D printers
This will do the job. Triffid Hunter's Calibration Guide - RepRap
Just as bad in NZ Sean - I have a package that's been stuck in Auckland for around 2 weeks so your not alone!
I think it would help if you could just describe the problem you are having - all these funny phrases clogging up your post just confuses those of...
docs:interface:start [OpenBuilds Documentation]
Well, even if there is another problem, it's imperative that you start with a perfectly uniform spoil-board. So far, we can only go on the...
"The wasteboards are dead level compared to the x and y axis. I confirmed this by checking the distance between the z-axis and the stock over the...
Here's my simple "temporary" router cable solution (well, ok, its been temporary for 3 years!) It cost me a nail to hang from the roof joist. My...
Best you start a new thread my friend.
Hey Tyson, sorry I mis-read your first post. What you're describing is (if I'm reading it right) quite normal behavior for pocketing- other...
Yes, that's rather strange behaviour. You could post the file on here so we could check the code and run it on the machine and see what we get..
Have you checked the simulation in Vcarve?
