Separate names with a comma.
Some features disabled for guests. Register Today.
Hi All, I have just hit a new out-out-of-bounds issue. I am trying to face my spoilboard. I am using the OpenBuilds post processor as suggested...
Is the fix to add the stock height to the setup? That's what I'm having a hard time understanding, how to fix it. Great explanation, I've tried...
if you read the Gcode (it is just text) you will see that the start and end Z moves are at Z max less a little bit, the default is 10mm. G53 G0...
Hello everyone, i´m doing my first steps in cnc and and i´m a little lost with the software. I use a RatRig Stronghold one (750x750mm) with the...
Having read through all of this and the associated links, none of them solved my issue. The issue was in the post-processor and can be found in...
Now that you have removed the G53 move your first move G0 Z-10 is in the WORKPLACE coordinates system and should go to 10 mm BELOW where you set...
I have an open build controller using Fusion 360. I removed the G53 line to use G54 and set the G54 X-Y-Z Zero positions. G 21 should be active....
cannot see anything wrong with the Gcode, but I do see that the post version is 1.0.32, the latest is 1.0.36, please upgrade so we are all using...
Hi I am going to add comments to the gcode below to explain what it is doing (Made in : Autodesk CAM Post Processor) (G-Code optimized for Grbl...
Hi everyone i know ima real noob but never have this issue with previous cnc and gcode file everytime i start a new job , the z axis go up...
read it more carefully, is a WARNING not an error. The post uses G53 moves which rely on proper homing and since we had a lot of people...
I have a Lead 1515 and generated gcode with fusion 360 with the OpenbuildsFusion360PostGrbl.cps V1.0.31. I can't figure out where is it telling...
How do I keep Fusion 360 from adding the G53 commands below? Those cause issues with my gcode. Without them, the program runs fine. With them,...
X and Y and Z ? at bottom left of your workpiece? from the code it looks like your work zero is the middle of the worpeice, so you need to...
Hello all, Trying to make my first cut with my 1515 - just a simple circle I made in fusion 360. I homed the machine, then set the work zero...
Here is what the g code looks like out of fusion 360 for me. G90 G94 G17 G20 (Operation 1 of 1 : pocket) G54 (This relies on homing, see Search...
The Openbuilds post processor for Fusion relies on the machine home position being set as it uses machine co-ordinates (G53) for the first safety...
Hi all just tried to cut a simple circle and while the simulator in the openbuilds control progrom runs fine when i press play on the machince to...
I'm getting this output in the Serial Console: This error may just be a symptom of an earlier event: ALARM: 1 - Hard limit triggered. Machine...
