Separate names with a comma.
Some features disabled for guests. Register Today.
I'm now sure that I am the issue, I was initially unsure whether or not the posts needed to be adjusted somehow to accommodate my machine. I now...
Apologies, the .gcode file I posted I edited manually. I have not edited the post. Was still a bit foggy from waking up and I'm trying my best to...
I’m going to read the link you sent but one thing to add is that I haven’t edited this code at all this was a direct fresh dump from fusion.
G53 Z-10 is a clearance move. It will move to 10mm below your z limit switch. Then move to the first position. By the looks of the log it...
Working on getting my machine set up and running and seem to be running into a problem in the beginning of every job. I’m using JS CNC with...
But rather than the built in fusion Grbl post that uses confusing G28, rather use ours that uses the easier G53 concept as linked above
Use the OpenBuilds Fusion Post: docs:software:fusion360 [OpenBuilds Documentation] Make sure you home your machine before setting work zeros....
Hello! I have a Lead 1010 and I've added a Sharpie pen plotter to it, and I could use some help figuring out the software (specifically how to...
It looks like the Black box processor did produce negative Z number for G53. Below is the gcode for the 1/2" bore operation. Do you see...
There are multiple coordinate systems G53 = Machine Coordinates = set by homing G54-G59.1 = Work Coordinates = set by probing and zeroing Fusion...
Thank you for this information. And, I will reiterate that I am new to the CNC world and trying to learn as much as I can. I am also new to Fusion...
Thank you for the response. I did finally find a post where you addressed this with another member (I think it was called "Z drop" or something...
By Homing and setting Start and End of Job to a negative number. See Search Results for Query: Fusion g53 | OpenBuilds
'Use machine configuration' may help or hinder, depends on what you set up in Fusion as your machine configuration. I would leave it off unless...
Sorry, please, then do tell us what? You haven't confirmed on denied - so I continued with the assumption, sorry! Indicating the GCODE is...
Hoping there is an answer to my question. I'm using the LEAD 1010 machine with the blackbox. I decided to use Fusion360 as my CAM package with...
When running the job: Home first, those moves are in G53 and is clearance moves Fusion default post uses G28 which is more confusing. Camotics...
G0 Z-10 at the start of the job ... Why ? I though this was the end of the code / job When I run the post process (Fusion 360) it always puts...
Fusion has a learning curve to it, but good choice. Remember to use our Post processor: docs:software:fusion360 [OpenBuilds Documentation] And...
You are taking about the Fusion built in Grbl post? which does a lot of things weirdly (that included) Most of our customers do (and more should)...
