Separate names with a comma.
Some features disabled for guests. Register Today.
My issue is, I have my machine zeroed out where I want the job to start, As soon as I click run job, The z axis should raise to move to its first...
it caters for router, laser and plasma machines it fixes small arc errors it reinserts missing rapid moves when needed it does not use G28 but...
There is the problem. That post is written by people who have never actually run a GRBL based machine, so is theoretically correct but in...
Is the fix to add the stock height to the setup? That's what I'm having a hard time understanding, how to fix it. Great explanation, I've tried...
if you read the Gcode (it is just text) you will see that the start and end Z moves are at Z max less a little bit, the default is 10mm. G53 G0...
Those options tell me you are not using the OpenBuilds postprocessor for Fusion360. Get it here docs:software:fusion360 [OpenBuilds Documentation]...
Now that you have removed the G53 move your first move G0 Z-10 is in the WORKPLACE coordinates system and should go to 10 mm BELOW where you set...
I have an open build controller using Fusion 360. I removed the G53 line to use G54 and set the G54 X-Y-Z Zero positions. G 21 should be active....
This is a lot more informative than your other post. If you remove the G53 G0 Z move Z axis will not move at the start of the job. Your error...
Hi everyone i know ima real noob but never have this issue with previous cnc and gcode file everytime i start a new job , the z axis go up...
read it more carefully, is a WARNING not an error. The post uses G53 moves which rely on proper homing and since we had a lot of people...
How do I keep Fusion 360 from adding the G53 commands below? Those cause issues with my gcode. Without them, the program runs fine. With them,...
Hello all, Trying to make my first cut with my 1515 - just a simple circle I made in fusion 360. I homed the machine, then set the work zero...
Here is what the g code looks like out of fusion 360 for me. G90 G94 G17 G20 (Operation 1 of 1 : pocket) G54 (This relies on homing, see Search...
(This relies on homing, see Search Results for Query: G53 fusion | OpenBuilds ) G53 G0 Z0 Z0 is always going to hit the limit switch, that is why...
Hi all just tried to cut a simple circle and while the simulator in the openbuilds control progrom runs fine when i press play on the machince to...
I'm getting this output in the Serial Console: This error may just be a symptom of an earlier event: ALARM: 1 - Hard limit triggered. Machine...
G53 Z-10 is a clearance move. It will move to 10mm below your z limit switch. Then move to the first position. By the looks of the log it...
Select flood and it will generate an M8. Make sure you have "has coolant" enabled in the post processor settings. flood = M8 mist = M7 flood and...
But rather than the built in fusion Grbl post that uses confusing G28, rather use ours that uses the easier G53 concept as linked above
