Separate names with a comma.
Some features disabled for guests. Register Today.
Ignoring homing for a moment, are you still able to jog the X axis left and right using control s/w?
You have 3D tabs selected in your setup - you don't need that for a 2D model. Also the tab is overly thick. I would de-select "3D" and set tab...
I still reckon you have backlash or loose fixings somewhere.
Hi Rhett, Tom Brady persuaded you to cut OAK at 10mm depth?. That guy sure has awesome mystical powers :). I would guess that stalling the router...
I had that problem once so just made an aluminum spacer from 3mm sheet. Holes oversized to allow plenty of bolt head clearance. [ATTACH]
Have you checked the coil pairs with a multimeter?
Both eccentrics should be rotated in the same direction so you don't introduce excessive misalignment in the bolt, but one wheel may well need...
I really can't see how it would make sense to tolerate a "floppy" machine, relying on software to correct the slop. Just get the machine right,...
It's not something I would ever consider doing, but you seem determined, so it's your choice.
Robert, Why do you feel probing is a pain in the.....? It is seriously much quicker and more accurate
Do you have a question Kevin?
As far as I know, only those folk who have your version (or later) of V-carve will be able to open your file.
Well, the math is correct but Amana may be basing that on an industrial machine? You don't want your machine laboring, so I would maintain the...
Have you tried a flooring shop for cork tiles?
If you multiply the diameter of a Delrin wheel by Pi, the distance calculated closely equates to the frequency of bumps (75mm+) you are...
Hey Thomas, don't abandon Openbuilds - it's your friend for life! I have to agree though, those bubbles are not good on the eye!
No snow alright - its gonna be 30C today!
Well, it should return to the start position of your job - raise Z, go to X0, Y0 as you suggest. i don't use F360 much so have no suggestions on that.
Could also be that the router is not perfectly at right angles to the base (if its actually a sawtooth pattern).
I've done plenty of tiling and find it pretty accurate. What method are you using to line up the second cut?
