Separate names with a comma.
Some features disabled for guests. Register Today.
OozNest (SPAM)? Guys at Ooznest will be mortified to read that!
You can do 3D modeling in Sketchup, then import to Vcarve
[ATTACH] Here's a drawing I did a couple of years ago - worked fine although I don't bother with limit switches these days.
I've made some Lithophanes on my machine - quite amazing how photolike they are when the back is illuminated.
You're doing fine Pieri, but for the sake of a bit of wire, personally, I would have the motors at the back.
Image from Workbee Build video. [ATTACH]
Are you using calipers to measure the internal diameters? They will usually read a smaller diameter - especially with small pockets because the...
You will probably get some different answers on this. For me it's a no.
malott92 I think we would all like to see how your spoil-board is mounted.
Not totally sure if I'm reading your first point right, but are you re-setting Z zero after a tool change? Secondly, the gantry being tight should...
I would have an adaptor fixed into the top panel. The main hose from the vacuum pump would then clamp onto the outside of the adaptor, then a hose...
Yeah, I don't think its worth agonising over too much, just get it the best you can and it should be fine.
You could do that. Just remember that the outer rollers are what I call the "registration" rollers - they ensure that the plates are square to the...
I re-designed the plates on my Workbee style printer to have only a 3 pair wheel set at the top for the very reason you are experiencing problems...
Do you mean "can a 4020 fit into a c beam"? If so, yes, it should but could depend on who the manufacturer is.
Couple of days apparently. In the meantime, go grab a pizza.
Giarc answered that in another thread. the best spindle?
If 3 routers have burnt out then they've obviously been overloaded - heavy loads means more current through the windings, more heat generated and...
Yes, 303.03 sounds strange. Given a 200* 8 motor config, then 303.03 would need a lead (mm/rev) of 5.28 (if my calc's are right) which sounds weird.
200 would be a starting point - you still need to calibrate all axes by measurement and calculation.
