Separate names with a comma.
Some features disabled for guests. Register Today.
To be honest, not sure what we are looking at. Need more pics to get it in context.
Didn't make myself clear. What I meant was, if there is movement up and down don't look at the coupling, look at the stop collars because if they...
Yes, another good point Peter. That can be checked by lifting the Z C-beam from the bottom and checking for movement but you will get some...
I would also check for backlash in the Y and X nut blocks.
Have you tried Netfabb? You can import STL files then scale them.
Assuming you fitted the anti-backlash nut with the adjustment screw on top, remove the motor and top C beam cover plate, you should see the...
You need to adjust the screw on the anti-backlash nut to remove the slop. Problem is, its something that really should be done during the assembly...
Yes, mine is at the top, however, on the 1010 and LEAD video, I think it showed it at the bottom?
If there is a cad file available, then probably yes.
I didn't really mean the filament cooler beside the nozzle - what I'm referring to is the printing environment. ABS needs a warm environment to...
Cold air is bad news for ABS or are you just trying to cool the electronics?
Have you re-booted the CNC and your computer?
I don't know what CNC you have, but all I did was remove my router from the clamp and then fix the dial indicator (by using the clamping hole in...
Well, if its a Workbee, have you checked out the manuals here.. Ooznest Learning Portal or on the openbuilds site?
So, from where did you purchase the machine?
There's a suggestion of one but it needs clarity!
It's not just the weight of the spindle that's a problem. You will also have a spindle that could overpower the chassis. If the cutter digs in too...
I don't think you can because of the way the shield is populated (although I've not seen it of course). You can however make a new shield with...
If the Z switch is normally open, removing the plug from the controller doesn't change the state unless the Z switch is already closed.
That's an impressive (and expensive looking) cabinet you have there! What glazing medium have you used?
