Separate names with a comma.
Some features disabled for guests. Register Today.
I never ever read the good reviews, only the 1 star and maybe the 2 star. Many of the 4 and 5 stars are paid reviews and even if they are not, I...
Since you have the option to do it, try (just for the kicks) to calibrate the axis on 800mm. If it's accurate there too you'll feel real good. I...
LOL, until I came! :duh: :duh:
Thanks, David, I'll try it.
I know the following problem was mentioned before but I couldn't find it. I run a g-code after zeroing the axes on the material (without homing)...
@David the swarfer, another thing with Gplot is that when I orbit and close the program when I open it again, through SketchUCam after generating...
6mm is darn close to 1/4" so get the 6mm pulleys and drill them out to 1/4". On the other hand, you can get it on AliExpress already in 1/4". Just...
LOL, I had a big sign on my monitor saying 'Zero Axis' and I still managed to not do it from time to time. :banghead: :banghead:
Do you have openings in the bottom to let the air in as it sucks the fumes out?
A new screw should not have a bow! If there is a bow in the lead screw expect some whipping when you run the machine. The higher the moving speed...
I enabled it and it still does the same, it doesn't rise, or lowers, the Z axis. I even tried to enable this line: // #define...
What attachment are you talking about? The Flex Shaft?
I don't know how you did you Z axis calibration but if you did it with a 1x2x3 block it may not be enough. Try calibrating the axis with a big a...
I figured that it is difficult but I thought since it's done in SketchUp, and it does it properly, that there is a API or some place to copy the...
While at it. Is there a way to make the pan option in the Gplot. It's kind of very short in the panning. I have to pan many times to get it to...
Well, we are back to the homing issue. I'll see how I can work around it in the settings. I don't 'home' and I don't want to.
I read the manuals but didn't find the option. I did see the 'quickpeck' but it sounded like not what I need. I didn't think about the multipass,...
Make sure you don't go beyond the 2017 version. That's when it stopped being free and mostly trouble free. Go for 2016 or 2017.
Thanks Peter. I looked at the code and it says '#define PARKING_TARGET -5.0 // Parking axis target'. It kind of surprised me since a - indicates...
@David the swarfer, I recently had drilled about 50 holes in a 3/4" plywood. I tried to choose peck drilling like we had on SketchUcam when you...
