Separate names with a comma.
Some features disabled for guests. Register Today.
Possibly, but that mainly boils down to you doing it :) - unchartered territory after all Can use G53 in gcode or javascript macros to do machine...
The standard posts are for standard 2/2.5D/3D work, you can try (not sure if it will work), but most folks that use BlackBox with wrapping uses...
Most folks use this one Rotary Demon Training
Just load and run jobs. With official accesories... Yeah
Interface can't run advanced javascript macros like those... Interface macros are plain old gcode. Check the PROBE folder on the USB stick after...
Just https://docs.openbuilds.com/doku.php?id=docs:interface:wifi-setup-nextgen (make sure your CONTROL is up to date - should be on V1.0.388) and...
Include serial log, but possibly set up Custom Probe under Probe type, but entered invalid numbers for offsets in the Gear icon popup?
Use the Troubleshooting tab to test Activate probes by hand watching the Probe pin status on Troubleshooting tab
doesn't loading up http://ip-of-the-computer:3000 in a browser work? Ipad (even mini) should have enough resolution: In vertical cuts off the...
No, never bothered. USB up to 3ft, anything over get risky. Better ways to do it than a long cable
Try first Still most of them just makes the USB cable longer. But your call to play with it after all (: Otherwise: Interface? [MEDIA]
Sounds like it might cause EMI problems (those cheap adapters are just extending the wires) Why not use Wifi: docs:blackbox-x32:wifi_setup...
See 2nd half of docs:blackbox-x32:currentadjustment [OpenBuilds Documentation]
https://github.com/OpenBuilds/OpenBuilds-CAM/issues/65 was a bug a while back, so if it came back thanks for the report, will reopen
Awesome, please post a write up Getting started with Javascript Macros in CONTROL / Library of Macros created by the community with screenshots...
Don't know Python/pyserial enough to help with your code, but compare against a known good Python sending script like...
Please use our recommended relay: docs:blackbox-x32:connect-dewalt-iotrelay [OpenBuilds Documentation] - safe mains isolation of mains voltages...
You should be able to yes,those statusses are available in that laststatus global object inside CONTROL (look at laststatus.comms.runStatus)...
Not at this time, keep a conversion chart at hand, you'll get the hang of it in no time (: Not that I know of G38.2 Z-30 F500; Perform touch...
They don't always place as nice with the X32 as the newer Interfaces, so heads up if you encounter issues Pinout of X32: >...
