Separate names with a comma.
Some features disabled for guests. Register Today.
Currently I've got power wired to the VFD, and the shielded motor wires wired into the plug for the spindle. I've got to wait until Friday for...
Torin3 published a new build: Overview of a 700mm x 1000mm machine based on the LEAD design and with the High Z mod from the start. Will have a...
Just a thought here, but the Y axis drag chain is looking a little tight at the end of the homing sequence. I have about 15 links left over from...
Well, just need to get the spindle working and I should be good to go. Adjusted the max travel for the smaller X and larger Z ranges. It will...
SethCNC has a nice video covering a lot of features in Control. [MEDIA]
I'm starting to assemble it and I just found out that I somehow missed the 8mm long M5x0.8 screws from my order. They're on the parts list, I...
Indeed! It is very nice and easy to use.
You probably need to invert X and Y using $3. grbl/settings.md at master ยท gnea/grbl If your current $3=0 you'll want to switch it to $3=3. If...
The vises are too short (4" and 6" and the 6" can't actually fit anything larger than about 5" with the guide rods on the ends), given that the...
I was thinking of using a lot of these: Black Angle Corner Connector But your comment is well taken. I could use the 20x20 and drill through...
In the picture, I've got 2 aluminum bars and a couple of plastic cam clamps to hold down 1 1/4" x 1 1/4" balusters for milling slots and pockets....
It is to me. But I would check out the very nice set of youtube posted tutorial videos to get an idea of what you can do with it first. There is...
I do. I'm only a moderate user though. What can I help you with?
I'm going to be switching jobs soon, and the new job will have me programming in Mastercam a lot. Is there a Openbuilds GRBL post available for...
Just FYI, the more recent Haas and Brother mills I use at work have a restart from arbitrary line option. They both appear to handle it by...
Got it. Different enclosures it is. Thank you!
I've got 2 other VFDs in my workshop. One on my manual mill and one on my belt grinder. Both have 2hp motors. I have run the belt grinder while...
I was already setting up an old metal PC case to house the VFD. Reading through that, I would think that I should ideally have a separate housing...
My spindle/VFD combo arrived (RATTMMOTOR spindle). And this paper was in the box. [ATTACH] If I'm reading this right, it is saying hook up the...
I just got the shipping notice this morning for my 1010 order. The order page in the shop shows only one tracking number, but I've got a FedEx...
