Separate names with a comma.
Some features disabled for guests. Register Today.
well, further research indicates that the .deb package has to be updated to reflect the new name libayatana-appindicator3-1 instead of the old...
it appears that debian bullseye no longer supports libappindicator3-1. any thoughts on a work around? i've found an article on a possible fix...
no worries there. our current avg humidity is in the teens and 20s. super dry right now. normal humidity is usually never above 60s anyway.
How cold is too cold to run my machine? I have quite a few projects I want/need to complete, but it is currently slated to be in the upper 20's...
i don't think it's the tram on the z axis. it's pretty much identical down both sides of each letter. i would think if tram was the issue it...
will do! thank you for all your help! just working out the minor kinks now. thanks to you and others helping me diagnose the stepper driver issue!
it's working now. once i completely removed all power from the unit, and rebooted fresh, it came right up. weird. but it's working fine now....
SUCCESS! I was able to finally run a gcode file and it came out mostly correct. Only thing I am seeing now is weird stairstep lines down the...
was able to get past this finally. apparently a complete power down is what it takes, and it takes a LONG time to reach that point!
Just connected my new OpenBuilds control interface, and had to use the OpenBuilds Control software to flash the firmware since the WiFi signal is...
RSP-320-27 https://www.meanwell-web.com/content/files/pdfs/productPdfs/MW/RSP-320/RSP-320-spec.pdf top of page 3 4th column over. says voltage...
So I found a meanwell power supply locally but it puts out 27 volts. Would that be within the capabilities of the black box controller to handle?
That was my thought. I have a new one on order and I have a friend that owns a 2 way radio shop so I'll check with him to see if he has one I can...
just to update everyone, i have a working machine! however, just for kicks, for whatever reason, i decided to check voltage coming out of my...
well, after tonight i will have a blackbox controller. basically if you take the lead 1010 and change out the uprights for the x axis from the...
openbuilds. pretty much everything except the controller, steppers and power supply came from openbuilds. the only reason i didn't get the...
lytle special. i took ideas from various builds and created my own frankenstein! it's got a little of several different machines. i used...
okay. should i lower that feed rate to say 500? the grbl settings for max feed rates are set to 1000 already. not even sure what the max can...
new controller just landed! will be putting it in tonight. i'll update everyone once i get that installed and test calibration. just to be...
also, inductance is listed as 2.5mH
