Separate names with a comma.
Some features disabled for guests. Register Today.
Is it possible to use a spring-loaded anti-backlash nut kit like the one shown at...
I thought that the store ran out of stepper motors and not C-Beam Actuators Bundles but I found out that all of the bundles will be shipping on or...
On Monday, I ordered three C-Beam Linear Actuator Bundles without motors since I already have them. I checked the status of order and it still...
Rick, Thank you very much for getting me the specs for HT23-200-6 motor.
I can't find specs for HT23-200-6 motors but I found specs for HT23-180-8 and HT23-260-4 motors at Probotix (PROBOTIX 260 OzIn 4-Wire Stepper...
I took three HT23-200-6 stepper motors off an old CNC router that I built about 10 years ago. Will they work with CNC xPro board?
I want to build the machine similar to the one shown in the image: [IMG] I think I'll need three 500mm C-Beam Linear Actuators and 12 Black...
Are there 3D models of stuff sold at the Part Store that I can "assemble" in software before buying the stuff? I found a few things on the...
Peter at OpenBuilds told me that the ACRO system isn't designed for CNC engraving/milling/routing and suggested that I get C-Beam Linear...
Please see https://openbuilds.com/threads/my-cnc-engraving-machine-based-on-arco-system.11525/
Is it possible to use NEMA 17 motors with the C-Beam® Linear Actuator Bundles?
I want to buy three C-Beam® Linear Actuator Bundles but they are made for NEMA 23 motors, not NEMA 17 motors. I already have CNC xPro board and...
I think that the ACRO system is not suitable as CNC router/engraver. Light engraving such as name plates would be OK but don't try CNC routing as...
I already have Cut2D 1.5. I can't decide between Cut2D V9 Desktop or VCarve V9 Desktop. Which should I buy? I usually create signs and...
I have a CNC router at the program for mentally-handicapped people where I work. The Porter-Cable 690 router motor burned out. The motor diameter...
The feed rate is too fast. The cut depth should be increased.
I have GRBL Panel V1.0.9.17 and CNC xPro board with GRBL 1.1. On my CNC engraving machine, the home position is supposed to be at left-front...
Do you have files for 3D printed parts?
From what I know about CNC routers, cutting too fast and/or too deep will ruin both bits and materials. You can break small bits. Depth of cut...
I cut my first sign on plywood tonight. I had to reduce the feed speed to 30in/min and pass depth to 1/16th due to the belt drive instead of screw...
