Separate names with a comma.
Some features disabled for guests. Register Today.
A 2.2kW spindle on a 1500mm 40x40 X rail is not going to lead any place good. I suggest abandoning the Shapeoko in its entirety and starting...
T-nuts and M5x8 screws. It is shown in the video.
You must have purchased them elsewhere. The store has only ever carried 1/4"x8mm and 5mmx8mm as these mate the two stepper sizes with the one...
Not sure why this isn't working out properly. A bit with 2" protruding below the bottom of the axis should be working perfectly. Without knowing...
I was thinking it was 10 or 12A. Household outlets are only rated at 15A.
Yes with an attached computer or with an INTERFACE CNC Touch Controller with a USB Drive
I would suggest Slot Washer - 15x5x2mm between the plate and the extrusion.
If you got a bit of extra extrusion and some plex consider building your own self drafting box. [ATTACH]
As you already have the BlackBox and like using it I suggest tapping into the slave motor pins. A better explanation can be found in the BlackBox...
Except for the part about having to buy a whole system in order to get one...
If you're looking for a true collet try Elaire Corporation -Router Collets
It's a little more complicated than that. If you're looking to get 350mm usable usable working width in the Y direction the board has to move...
The 14 tooth pulleys offer better resolution.
Obviously an error. Thank you for pointing it out. Should be just as the Part Store description of the LEAD 1010 "X Axis 29" (730mm) / Y Axis 32"...
Dig through that area of the Builds Section of the forum. There are a number of good examples. For the most part the screws are set outboard of...
Make sure the rails clear the Y-axis gantry plate and the connections fit in the corner (one area where you've already noted an issue).
I think there is no magic to the exact location of those outer rails supporting the edges of the spoil board. Pick a number that works and carry...
...or you could get a chop saw and cut them down yourself. Aluminum cuts like butter.
In the stock kits everything is cut to proper length. If you need something cut to other than the lengths provided put a comment in the order...
Yeah, didn't notice that (as noted several times, it was a quick mashup). As there is no magic about where that rail sits you can either fudge it...
