Separate names with a comma.
Some features disabled for guests. Register Today.
As noted above the drawing may not be dimensionally accurate. It was a quick mashup. Yes, the table from the shop is considerably larger than the...
Best just to point you to the source of all things OpenBuilds | 3D Warehouse (sketchup.com) As far as the changes, the (6) 20x40 bed framing...
Truly, I'd go with a slide gantry counterbalanced with a constant force spring. Trying to automate this will wind up being more trouble than its...
Got some sleep and decided to give it another go. This revision resolves the Y-axis issues. [ATTACH] Actually turned out rather nicely. Still...
Attached is a Sketchup mashup of the 1515 with the table. Really doesn't work directly. Saves about $72 in rail but the legs interfere with the...
The washers under the nut blocks is often related to having the extra washer on the wheels.
Of course it can be done. You’ll just need to do a bit of resizing on the lengths of the table framing members. There is a big difference though...
When the power goes off the gantries all crash to the bottom.
Not sure about the screws but the parts store will cut the extrusion to length for you. Make a note in the comments when you order. The lead...
This is a question for the parts store. The main problem with the stock High-Z mod for a low rise application is the 500mm length of the...
Not sure where you are seeing this. I'm not really sure if it matters which way the brass holder faces. Main issue is getting the washer with the...
Can you lower the bed any?
A couple of resources you might look into include: Eliminating Lead Screw Whip on the Workbee CNC Router | OpenBuilds Won't be much help on...
Something so small and moving around like that can be a nightmare for dyslexics. I was eventually able to tune them out but it took a fair amount...
This may have been built prior to the 27mm screws being added to the store.
The following would be my suggestion for the most economical conversion of a minimill based on the extra parts you stated above [ATTACH] Based...
You may also want an additional lengthwise bed support to cover the additional width.
It’s hard to say what you still need without knowing exactly what you already have. Please post a list of extrusions, plates, and wheels you have...
Merely extending the rails does not make for an 8’ system. You have to extend the drive system too. What were your plans there? A 6mm belt is...
That router is way too heavy to be hanging off a single rail like that. With a little ingenuity you could add another rail similar to the LEAD...
