Separate names with a comma.
Some features disabled for guests. Register Today.
That's truly up to you. Now do something fun with your new machine and you can come back and revisit the issue later if you feel the need.
You might leave a comment on his page and ask which one.
In the upper right corner on the AliExpress page click on "go to global site"
Contact the parts store. They'll take care of it.
The OpenBuilds Workbee 1050 (40" x 20") would probably be your best option. The reason being the shorter the gantry, the stiffer the system and...
I can't really see well enough in the video to truly identify the location of the flex but it appears you may need to re-tension the wheels on the...
Very nice looking actuators.:thumbsup: Should be able to incorporate these. It all comes down to working out the connections. These connect with...
Google search: 3.81mm
Video and a follow-up. That's the MSRP.
If you look back through the old CNC designs you'll find this is not a new concept. There are a number of examples over the years. The Routy which...
Check the solder joints on the boards. May not solve the problem but it is generally a good place to start.
Yes, this approach will require eccentric spacers on all wheels. As far as positioning issues, just use careful attention while orienting the...
Sorry but I've never used them. Hopefully someone on the forum will chime in with suggestions. It's possible but without doing the math I really...
The issue here isn't the beams but the screw that does the lifting and it's an issue for a number of reasons. TR8x8 screws shouldn't be taken...
If you’ll look closely at the images on OpenBuilds ACRO System you can see that the front and rear framing pieces do extend past the Y axis rails.
After the rail has pulled the screws out of the plywood for the third time consider...
That's a question best asked to @Christian Knüll as he's the author of the software.
Colin, on the next machine put the bearing on the table and push the wheel down over it with the heel of your hand. Way easier and you don't wind...
Please contact the distributor you purchased the kit from for resolution.
As I noted in a previous post, contact the parts store for assistance. They need to know when things are out of tolerance. Use either the Contact...
