Separate names with a comma.
Some features disabled for guests. Register Today.
@AK Eric Your print came out better than a makerbot Z18! FFCP vs Z18 • /r/3Dprinting versus New 3D Print : Reindeer!
Design is 1mm.... but fortunately you can just add a washer inside to give yourself clearance.
It could be fun and simplify things, but I don't really like the idea of my Z axis moving around all the time (within layers)
Has anyone done this and is happy with it? Enable Auto Leveling for your 3D Printer with an inductive sensor (Marlin Firmware) they are surprising...
Now THAT is a fan shroud!
@Austin Seagers These look like good improvements. I had thought that the front XY motor brackets needed a brace between the motor mount plate and...
Just point the fan to NOT directly blow on the hotend tip. Angle it down to the bed more. Part cooling fans on PLA are very helpful for printing...
I can't see if you have a part cooling fan on there or not (I thing I see a white shroud), but what might be happening is that when the fan starts...
Yes it would be easier, but then you would be trapping the Z motors in the warm environment.
Some Beta version beefed up parts for comment. Bottom plates go one on each side of a corner with the corner bracket on the inside. The 20mm...
Yeah, could be just a bit of increased friction from minor binding or accumulated debris. Hopefully nothing much to worry about. Still a bit odd...
I wanted to choose one Z axis modification as then the BOM, extrusion calculator, and 3D rendering will all be simpler (less work for me). Here is...
Thanks, that is the kind of info I need. It was a toss up between the 3 different Z axis mods as they are all good and seem to be working well (2...
Alright, due to the popularity of the 12"x12" build (and lack of 8"x12" interest), I am thinking of updating all the stls to be more robust and...
Yep, that was my problem. Just running too hot.
Nice, what was your nozzle temp at?
Tis the season... Didn't have the Z height for the 100% scale version so rather than reduce the size and risk the antlers being too thin I just...
Looks like there is some play somewhere that is allowing slight shifts in the XY plane layer alignment. This could be the an issue somewhere in...
And blue painters tape make a great surface for and unheated bed with PLA.
These look great BUT a word of warning: Don't over tighten with these! The reduced contact area of the nut to aluminum versus the T-nut can...
