Separate names with a comma.
Some features disabled for guests. Register Today.
Is there a binding issue with the shims directly on the bearing inner race? In the original kit it was okay to have the spacers directly on the...
60mm M5 bolts would make the V2 easiest, I used a 40mm and a 12mm with a metal threaded standoff in between. Works no problem, but not as ideal.
One really could use all printed spacers or at least half. They are loaded in compression and aren't exposed too much cyclical forces. Or as a...
Sheffdog's right, 32 1/4" spacers @ eight per moving plate and 8 more for the original Z setup. For the version 2 Z setup it depends on what you...
Yes, it looks like they switched the content. They use to include all the items in the one picture and now only include the lesser content shown...
And if anyone has created or found a good generic mount please share.
Mine is supported by the base frame. I didn't share mine as they wont be the right size for anyone. When creating the extrusions lengths part of...
I renamed the file "XY Bar Moving Ends" so hope that helps a bit.
Yeah, the V5 I had was an Ebay clone. Probably would of been fine with ABS, but I was using it with PLA and it would jam constantly. I print 95%...
This was done with slic3r and it is an ooze wall. Different than a purge wall in that it takes the deactivating hotend outside the wall, drops...
Yeah, in my experience I've found rip off hotends are not worth the frustration. I've had fake J-heads and an E3D v5.
Dual extrusion finally achieved! Still needs some tweaking in the nozzle realtive position settings, but not bad for second print. [ATTACH]...
Yes, was making an update last night and forgot to reload. Posted.
Are you going to use an 18 or 20 tooth pulley? Approximately: 20=13.4mm 18=12.7mm If you are using the 18 tooth, I did a visual check and there...
You definitely won't be able to use the same offset I did with the 16 tooth pulley's, as the diameter of the 20 tooth will be larger. It will...
I've added your additions into an assembly zip file with the pdf and pics. This way they won't get lost in the discussion forum and others will...
Looks great, thanks for updating and contributing!
When I created my BOM these corners came with two low profile M5 screws. I'll take a look at the BOM.
I don't see any issues with the design. What size of motor is that? It looks giant in that last photo. I can't check the shaft alignment for...
Yes, I'd say for the most part, I'd have to go through each file to double check, but if you view the stls and look at a picture of the printer I...
