Separate names with a comma.
Some features disabled for guests. Register Today.
With my current bowden setup and carriage design, I have 35mm extra in lead screw length for the E3D after homing the Z. I wanted extra in case I...
I went with the mini Vs on the H-Bot that I built before the Core XY. The idea was to keep the XY bar as light as possible and the mini kept both...
I actually sourced my threaded rod from eBay in 300mm lengths, which is why my build hieight is different. This was before OpenBuilds carried...
Sorry, I was referring to Nick's and my lead screws. Your's are arranged how you'd want them. The BOM calls for only 20x40 unless the back Z axis...
Z Axis: A couple people on here have expressed concerns with this type of a setup for wobble potential. In theory it will work, but everything...
Are you just trying to keep everything inside the frame for aesthetics or for ABS? I've thought about putting panels on mine that either cut...
Are you using the original L brackets? These were specifically designed to mount in a pair around a 20mm side of extrusion. As Adam noted, they...
I am not sure about getting exact sizes on large holes, as I've read that some of that has to do with your slicer, some with the triangulation...
This would be more noticable on your 12" bed versus my 8" (front/back). Why would you have to re-level your bed though? Why doesn't it bounce...
I used a 9mm rectangle extruded 1mm, with a 1mm fillet on each side.
I used a mitre saw on my extrusion as well. Even used a wood blade and it cut no problem. Of course a great choice for a deck project too....
Can you post a pic of how the lead screw belt pullys are attached and how the lead screws are supported? Do the lead srews neck down in size or...
Is that GT2 belt? Did you order a loop belt or are you going to splice it somehow? Coming together nicely.
I've never seen those endstops before NickM posted them. They are just like the MechStop v1.2, but in a neater, tighter package. One could...
1.8 correspond to the 180% speed modifier I am adding to modify my default speed parameter settings through the LCD/SD card interface. If I was...
Yes yours are definitely different, but not necessarily higher. For ex, your infill is printing at 100mm/s and mine is a 60*1.8=108mm/s and most...
I've now achieved 180% print speed... well 179%. Didn't think think my direct drive extruder would manage but it wasn't even that much hotter...
If you were getting good quality prints beforehand then it likely isn't an issue with your software unless you made a change. Slic3r settings are...
Hey JC, haven't heard from you in a while. Sadly now we know why. What was jamming? Filament? Threaded rod? You were coming up with some...
I am not familiar with sailfish and how it differs from marlin. What made it your choice? Pictures are looking good, the black anodized aluminum...
