Separate names with a comma.
Some features disabled for guests. Register Today.
A couple vids of the printer in action.
Earlier in this forum Giuliano M came up with a similar idea, except that he drove each lead screw directly (see below). At the time I was a bit...
The cyclops is new just this year and there is surprising little info about it on the E3D store. I do like the concept of it and they say...
I would suspect that a really long transition section might be an issue for dual extruders as you might have to use longer retractions and be more...
I've been too lazy to do the wiring for my dual extruder so you beat me to it! Oozing yes, but a nice starting point. I use 4mm retraction now...
That makes sense, but I think the issue Nick and I had was cracking due to bending. The brackets span over the slot of the V-slot so when we...
Hey Nick, I misinterpreted what you had said before. Yeah, especially with PLA. Very easy to overtighten the bolts and crack a part as it is so...
You're right, you need to print a copy or one or the other not the mirrored version. I left both originally as I wasn't sure if I wanted the...
adamcooks is planning a similar setup. It sounds like a solid option for the larger bed sizes. NickM went the 20x60 route and has some great...
Maybe one of their re-sellers has the original prices still? That is a steep increase as V-slot is already more expensive then your standard 20...
And unfortunately the 10mm bolts with a couple washers won't work as the bolt heads will collide. This is why I designed the printed corner to...
Looks great, that's huge! What length of lead screws are you using? M5x10 work with the printed corners. I thought the Open Builds store corners...
Spec wise those look fine. Length is not an issue for those. If you put rubber feet on the bottom of the printer then you can put up to 60mm...
The v6 E3D bowden version does extend the PTFE fairly deep into the finned portion but not to the heat break or heater block. It allows me to...
The LEDs in my strips are the 5050s. As long as your LEDs stay stuck to the extrusion and your bridges aren't drooping then they easily clear....
The files in the zipped folder should be .123dx extension. That is because they were created with AutoDesk 123D software, so if you are looking...
Those colors look very nice. Good news from my local seller, they are going to bring some PETG in with their next order from eSun so I'll give it...
Interesting, I found my E3Ds fit a little different then my official J-Head as well. Keep in mind that the base slot for the RIGHT hotend of the...
What hotends are you using? I made it for two v6 E3Ds. The solution to the homing issue doesn't have to be an endstop relocation (unless that is...
CADing redone.
