Separate names with a comma.
Some features disabled for guests. Register Today.
****, you are correct. I'll update ASAP.
The M3 Nylocs aren't required, but I was planing on using them for the XY bar idler pulleys. As for the spacers, it seems Open builds sends out...
The benefit with 1.75mm filament versus 3mm filament is the force required on the drive is less. For the same pressure at the tip of your hotend...
Are you using sli3r? If so, just go "split parts" and it will drop everything to Z=0
Never heard of that filament, sounds interesting. Yeah, as a consumer you want everything: fast, accurate, capable of printing all materials,...
I've never attempted to maximize print speed, I've always gone for quality and worked on making incremental improvements on that front. My...
Interesting Z axis. You should build it! I found the extra tuning requirements for a coreXY setup are negligible compared with the overall build...
I used a long spacer instead of adding another 8 v-wheels for a cost savings. I knew from my previous design that they could handle the loading...
I am pretty happy with the Z axis setup and I am getting excellent quality prints out of it (much better than my OB1.4 which does suffer from...
The printed extension would work, but they require using 55-60mm bolts, right? Sourcing metric is surprising hard in Canada which is on the...
I've added an "Assembly" doc to the files section. More work then I figured. I skipped the wiring/programming/tuning sections but if you have...
Was wondering how you like your E3D and what filament drive are you using? The enclosure will be good for ABS as well.
Looks like a solid build. I see some external frame outside the motors in the design but not in the build itself. What was it's purpose? No...
I am no expert on this front, but those look good to me. They are similar to the ones on the open builds store. I don't know what the STH versus...
I am printing at 120% (x 1.2) the below. I think you will be fine with those motors for the XYZ as my motors are just warm and have no cooling at...
I thought I had 86ozin motors but I missread. They are 68ozin. My motors are: 42HS48DF02 I am happy with these but would consider getting a...
Bad news. This is where I had purchased it, unfortunately they just significantly reduced the colors they carry about 2-4 months ago. They no...
Here are a couple parts you might find useful for your Z axis since you went with the 20x20. I haven't changed my printer to them, but wanted to...
I've noted multiple sources for many of the items so this question is a bit hard to answer. For example, you can purchase the power supply from...
Was off on vacation. I will finally get to work on some build instructions. Depending where you are at there are a few options for getting...
