Separate names with a comma.
Some features disabled for guests. Register Today.
I've seen others that have used a similar setup with smooth rod and linear bearings. It seems that they don't have any issues, but my concern is...
I don't have the exact hours as I turned of the power before checking. I'd have to say about 20hours. It ran overnight and ended some time while...
My latest print: http://www.thingiverse.com/thing:16218 [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Completely up to you! I sourced 300mm lead screws so that is what I used and it is a fairly typical build height for reprap printers, excluding...
If memory servers me correctly: I printed mine in PLA with a 0.4mm nozzle, 0.2mm layers, 6-8 forced perimeters, 10-12 top/bottom layers, and 40%...
I took a few pics of my extrusion for a visual. It may be an optical illusion, but I still think the extrusion inside corner fillet are too big a...
Click on "files", the tab to the right of the "parts list" tab that you are on in the picture above. It is mixed in with the stl files. There...
nice find, has a good wall thickness to prevent it from cutting into the plastic upon tightening.
If it wasn't for shipping the open build cost wouldn't be too bad. I have found that the shipping estimator is bad for small packages, but if you...
Note: updated BOM Added extra 1/4" aluminum spacers to the BOM, they are needed for the two plate setup (two per wheel) and the mini V wheel kit...
Here are some prints in black ABS. http://www.thingiverse.com/thing:482043 The little guy figure below was printed with pillar support,...
Excellent mod. You said you were using sketch up for them? Two things to note: -V-Slot has pretty sharp corners. You are going to have to...
I can't really make that comparison as I have never seen an Ultimaker in person. The V-slot is very smooth and vibration free in my experience....
None taken, though I am not sure what you mean, is that an openbuilds site discussion status? This thread is new as I've just posted the build on...
It is under the "files" tab of the build
Looks good. I see you are going with a 20x20 on the vertical legs. I think this a good modification to enable the use of a two plate setup for...
I got mine custom cut from Voxel factory. It is 3mm borosilicate, which is nice for it's low thermal expansion and thermal shock resistance but...
You're right, there really isn't much of a savings in plastic. It really isn't a critical stress area so I don't think there are any structural...
The blue circled hex holes serve no purpose, they are just holes so that less plastic is used during printing. The red ones are for bolts to the...
I've seen some setups that do this, but having had the issues with the H-Bot rigidity I didn't want to skimp. I think with some part redesign it...
