Separate names with a comma.
Some features disabled for guests. Register Today.
The openbuilds one will need 2inch corner extensions or another larger plate bolted to it. Use the 12" Amazon one instead. FWIW, a 9/32 drill bit...
With the same 40mm spacing between Y extrusions your hole spacing would be 100mm, my hole spacing is 60mm (wheel holes are 10mm out from edge of...
When I build If you use the same spacing (40mm between Y rails) your outer wheel holes will be 100 apart. The openbuilds universal build plate...
Elmo, Curious what are you using for the build plate?
I'll be getting it Wed. Will check it out and respond then. Thanks again.
Thanks Elmo. I had no idea it existed. I need a new rod, this is what I'll be ordering. It also has enhanced hardness over unfilled 6/6. Changed...
Link for the MDS ones? 6/6 nylon is already "self-lubricating". Any nylon, to some extent, is "self-lubricating", it's the surface tension of the...
The link to the BOM is in the first paragraph. I know, stupid place to put it. I'll list it down with the other files. It is a 6/6 Nylon 5/16"...
Loglow, could you briefly describer the mods you've made and what they accomplish for others browsing the discussions?
I just realized that I had those two feet in two different stl files. I've corrected that, they are now only in the...
Hedgehog No Sketchup only exports to DAE. But, it appears to be a RAM problem from what others were saying on that forum. Download the ZIP...
Download the http://3dwrx.com/TrueUp/kit-assembled.zip file. It is the printer fully assembled. That should be helpful in your reconstruction. I...
Elmo. I've changed 1-11 and 1-13 in the Assembly Guide TrueUp Glide Frame Assembly In the BOM at the top of the steps click the Printed Parts...
I've faced that dilemma of having lots of the wrong wheels too. Common problem actually. But, the difference between X and Y is weight/mass,...
PLEASE use the new revision TrueUp Kit Version if you are beginning a new build. [IMG] The simple answer - because every time a print...
This will be an interesting build for me, and others to watch. You are certainly not the only one who's wanted a 300x300 version. Others will look...
I assumed you could get them cheaper locally.
I just habitually split multi-part STLs so I probably didn't notice they auto-realigned to bed when I did it.
Elmo. That looks like it will work. One suggestion. The two access holes on the upright extrusions, use M5x50mm screws running through an endcap...
Yup. Just swap out the two upright extrusions for 100mm longer and re-place the two screws with longer ones. No other alterations would need to be...
